Silicon photonics holds great promise for low-cost large-scale photonic integration. In its future development, integration density will play an ever-increasing role in a way similar to that witnessed in integrated circuits. Waveguides are perhaps the most ubiquitous component in silicon photonics. As such, the density of waveguide elements is expected to have a crucial influence on the integration density of a silicon photonic chip. A solution to highdensity waveguide integration with minimal impact on other performance metrics such as crosstalk remains a vital issue in many applications. Here, we propose a waveguide superlattice and demonstrate advanced superlattice design concepts such as interlacing-recombination that enable high-density waveguide integration at a half-wavelength pitch with low crosstalk. Such waveguide superlattices can potentially lead to significant reduction in on-chip estate for waveguide elements and salient enhancement of performance for important applications, opening up possibilities for half-wavelength-pitch optical-phased arrays and ultra-dense space-division multiplexing.

No abstract

We introduce direct curvature control in designing a segmented beam expander, and explore novel design possibilities for ultra-compact beam expanders. Assisted by the particle swarm optimization algorithm, we search for an optimal curvature-controlled multi-segment taper that maintains width continuity. Counterintuitively, the optimization yields a structure with abrupt width discontinuity and width compression features. Through spatial phase and parameterized analysis, a semi-lens feature is revealed that helps to flatten the wavefront at the output end for higher coupling efficiency. Such functionality cannot be achieved by normal tapers in a short distance. The structure is fabricated and characterized experimentally. By a figure of merit that accounts for expansion ratio, length, and efficiency, this structure outperforms an adiabatic taper by 9 times.

A microring modulator array coupled to a common bus waveguide can be used to construct low power, compact and flexible wavelength-division-multiplexing (WDM) transmitters. However, due to extremely small working bandwidths of the rings, it is challenging to find the right resonant wavelength setting and locking the resonance to an external laser. In the paper, we propose a novel technique enabling simultaneous wavelength locking of a microring modulator array with a single monitor, together with automatically optimizing the wavelength setting. We experimentally demonstrate locking three rings over a temperature range >40 °C at 3x20 Gb/s on-off-keying (OOK) modulation and ~3x75 Gb/s discrete multi-tone (DMT) modulation.

We propose a novel approach to demonstrate simultaneous multi-wavelength locking during temperature changes in a silicon photonic polarization insensitive microring-based wavelength division multiplexing (WDM) receiver. The DC component of a single monitoring photodetector at the through port of the microring filter array is exploited as a feedback signal with no additional power consumption. This feedback signal is used in control circuitry to properly tune the microring filters using ohmic heating, thus creating a feedback loop for thermal adaptation. We describe the necessary information, specifically each microring filter's room temperature resonant wavelength and tunability, which can be used to calibrate and achieve proper wavelength configurability and locking. In addition, we describe a simple control algorithm based on an adaptive gradient method often used in machine learning, allowing the receiver to endlessly demultiplex at different temperatures. We successfully achieve thermal adaptation over a temperature range >37°C and demultiplex a 4 × 25 Gb/s on-off-keying signal of 150 GHz channel spacing, all while the polarization is scrambling.