Because of our lin ' oly you are requested to rs this copy os son-E 1\ !ved your purlpoQes so '- ,. . ..

Ortho‐vinylbenzaldehyde has been prepared in a three‐step synthesis. Vacuum‐degassed monomer was polymerized with azodiisobutyronitrile initiator in bulk and in solution in 2‐butanone. The kp/kt1/2 value at 60°C is 4.7 × 10−2 L1/2 mol−1/2s−1/2. This is about twice the ratio for styrene. Chain transfer to monomer appears to be significant. Insoluble, crosslinked products were produced at high conversions, because of chain transfer to polymer. Tg of poly(ortho‐vinylbenzaldehyde) was found to be 142°C. Polymers made under N2 atmosphere often contained acetal groups. These can be produced by acid catalysis in the presence of small concentrations of ortho‐vinylbenzyl alcohol. A laddertype structure is produced. The monomer is capable of photoinitiation. Insoluble gels were produced in bulk monomer at all conversions. The initiation rate was very high and crosslinking resulted from combination of radicals produced from photolysis of the pendant 0‐benzaldehyde groups in the macromolecules.

In an attempt to develop a low‐k interlayer dielectric, adamantane‐diphenyldiethynyl moiety containing oligomer is prepared. Oligomerization of 1,3,5,7‐tetrakis[3/4‐ethynylphenyl]adamantane (4) is accomplished by a Glaser–Hay oxidative coupling with 1,3,5‐triethynylbenzene and phenylacetylene end‐capping agent. The CHCl3 soluble oligomer is then thermally treated by step‐curing at 200, 300, 380, and 450 °C for 30 min at each temperature under nitrogen flow to render a shiny void‐free black polymer. TGA analysis indicates that the polymer is stable under nitrogen up to 500 °C with a marginal decomposition up to 800 °C. Solid‐state 13C NMR, Raman scattering, and FTIR are used to characterize the structure of the polymer. The polymer consists of amorphous carbon networks with the adamantane moieties and nanosized graphitic regions (clusters), which are generated from the thermal crosslinking of the diphenyldiethynyl units. It shows a remarkably low linear coefficient of thermal expansion (∼25 ppm/°C), presumably due to the presence of the disordered graphitic structure. Its high density (∼1.21 g/cm3), refractive index (∼1.80 at 632 nm), and Young's modulus (∼17.0 GPa) are also consistent with the interpretation. This study reveals important details about the effect of microscopic structure on the macroscopic properties of the highly crosslinked polymer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6909–6925, 2006

No abstract

No abstract