No abstract

No abstract

The perception of the maintenance demands of low impact development (LID) systems represents a significant barrier to the acceptance of LID technologies. Despite the increasing use of LID over the past two decades, stormwater managers still have minimal documentation in regard to the frequency, intensity, and costs associated with LID operations and maintenance. Due to increasing requirements for more effective treatment of runoff and the proliferation of total maximum daily load (TMDL) requirements, there is a greater need for more documented maintenance information for planning and implementation of stormwater control measures (SCMs). This study examined seven different types of SCMs for the first 2-4 years of operations and studied maintenance demands in the context of personnel hours, costs, and system pollutant removal. The systems were located at a field facility designed to distribute stormwater in parallel in order to normalize watershed characteristics including pollutant loading, sizing, and rainfall. System maintenance demand was tracked for each system and included materials, labor, activities, maintenance type, and complexity.

Coal-tar based sealcoat has been identified as a source of polycyclic aromatic hydrocarbons (PAHs) in the environment. This study measured the long-term release of PAHs in parking lot runoff and found that the presence of coal tar sealant increased the mass of PAHs released in runoff by over an order of magnitude. PAH concentrations in stormwater from two coal tar sealed parking lots and one unsealed parking lot (control) were monitored over a two-year period. The measured flow volume and concentrations were used to calculate a mass of 9.8-10.8 kg total Σ16 PAHs per hectare exported in stormwater runoff from the two sealed parking lots and 0.34 kg total Σ16 PAHs per hectare from the unsealed control. The study also measured sediment PAH concentration changes in a receiving drainage and found that even partial coverage of a drainage area by coal tar sealant resulted in measurable increases in PAH sediment concentrations; PAH concentrations in sediment in a stormwater swale receiving runoff from both sealed and unsealed lots increased near the outfall from less than 4 mg/kg prior to sealing to 95.7 mg/kg after sealing. Compound ratio plots and principal components analysis were examined and were able to clearly differentiate between pre- and postsealant samples.