Clogging of tundish and submerged entry nozzles (SENs) adversely impacts productivity and quality in the continuous casting of aluminum-killed steels. Clogging results from an accretion layer that develops on the inside surface of the nozzle and restricts steel flow. Current nozzle refractories often react with molten steel to form solid by products that promote clogging. Nozzle materials that are inert with the liquid steel or react with accretions to form liquid reaction products could inhibit or eliminate clogging. Static experiments were conducted to investigate the stability between calciumbased materials and aluminum-killed steel. The results indicate that both calcium titanate and calcium zirconate react with alumina to form calcium aluminates. However, only the reaction between alumina and calcium titanate yielded calcium aluminate chemistries that were molten at steel casting temperatures. Liquid reaction products are preferred since they would be removed from the nozzle by the steel flow, thereby preventing accretion formation and clogging.

The clogging of submerged entry nozzles (SENs) and tundish well nozzles is a common problem in the continuous casting of aluminum-killed steels. Clogging occurs when alumina attaches to the inside of the nozzle restricting the flow. This article explores the use of new nozzle materials that could prevent accretion growth through the formation of liquid phases at the inclusionrefractory interface. Casting simulation experiments were conducted using three nozzle refractory formulations: calcium titanate, calcium zirconate, and a 2:1 calcium titanate to calcium zirconate molar mixture. Nozzles fabricated from these materials cast more aluminum-killed steel without clogging than typical industrial alumina graphite nozzles. However, the nozzles constructed of calcium titanate dramatically outperformed alumina graphite, calcium zirconate, and the mixed nozzles. Microscopy investigation of spent nozzles found no accretion formation in the calcium titanate nozzles. The performance difference was due to the formation of a liquid calcium aluminum titanate phase, which prevented alumina accretions.

No abstract

No abstract

No abstract