This paper presents the development of a new electromagnetic hybrid damper which provides regenerative adaptive damping force for various applications. Recently, the introduction of electromagnetic technologies to the damping systems has provided researchers with new opportunities for the realization of adaptive semi-active damping systems with the added benefit of energy recovery. In this research, a hybrid electromagnetic damper is proposed. The hybrid damper is configured to operate with viscous and electromagnetic subsystems. The viscous medium provides a bias and fail-safe damping force while the electromagnetic component adds adaptability and the capacity for regeneration to the hybrid design. The electromagnetic component is modeled and analyzed using analytical (lumped equivalent magnetic circuit) and electromagnetic finite element method (FEM) (COMSOL ® software package) approaches. By implementing both modeling approaches, an optimization for the geometric aspects of the electromagnetic subsystem is obtained. Based on the proposed electromagnetic hybrid damping concept and the preliminary optimization solution, a prototype is designed and fabricated. A good agreement is observed between the experimental and FEM results for the magnetic field distribution and electromagnetic damping forces. These results validate the accuracy of the modeling approach and the preliminary optimization solution. An analytical model is also presented for viscous damping force, and is compared with experimental results The results show that the damper is able to produce damping coefficients of 1300 and 0-238 N s m −1 through the viscous and electromagnetic components, respectively.

No abstract

No abstract

The capability of drones to perform autonomous missions has led retail companies to use them for deliveries, saving time and human resources. In these services, the delivery depends on the Global Positioning System (GPS) to define an approximate landing point. However, the landscape can interfere with the satellite signal (e.g., tall buildings), reducing the accuracy of this approach. Changes in the environment can also invalidate the security of a previously defined landing site (e.g., irregular terrain, swimming pool). Therefore, the main goal of this work is to improve the process of goods delivery using drones, focusing on the detection of the potential receiver. We developed a solution that has been improved along its iterative assessment composed of five test scenarios. The built prototype complements the GPS through Computer Vision (CV) algorithms, based on Convolutional Neural Networks (CNN), running in a Raspberry Pi 3 with a Pi NoIR Camera (i.e., No InfraRed—without infrared filter). The experiments were performed with the models Single Shot Detector (SSD) MobileNet-V2, and SSDLite-MobileNet-V2. The best results were obtained in the afternoon, with the SSDLite architecture, for distances and heights between 2.5–10 m, with recalls from 59%–76%. The results confirm that a low computing power and cost-effective system can perform aerial human detection, estimating the landing position without an additional visual marker.

No abstract