A strategy to overcome the unsatisfying catalytic performance and the durability of monometallic iron‐based materials for the electrochemical oxygen evolution reaction (OER) is provided by heterobimetallic iron–metal systems. Monometallic Fe catalysts show limited performance mostly due to poor conductivity and stability. Here, by taking advantage of the structurally ordered and highly conducting FeSn2 nanostructure, for the first time, an intermetallic iron material is employed as an efficient anode for the alkaline OER, overall water‐splitting, and also for selective oxygenation of organic substrates. The electrophoretically deposited FeSn2 on nickel foam (NF) and fluorine‐doped tin oxide (FTO) electrodes displays remarkable OER activity and durability with substantially low overpotentials of 197 and 273 mV at 10 mA cm−2, respectively, which outperform most of the benchmarking NiFe‐based catalysts. The resulting superior activity is attributed to the in situ generation of α‐FeO(OH)@FeSn2 where α‐FeO(OH) acts as the active site while FeSn2 remains the conductive core. When the FeSn2 anode is coupled with a Pt cathode for overall alkaline water‐splitting, a reduced cell potential (1.53 V) is attained outperforming that of noble metal‐based catalysts. FeSn2 is further applied as an anode to produce value‐added products through selective oxygenation reactions of organic substrates.

Identifying novel classes of precatalysts for the oxygen evolution reaction (OER by water oxidation) with enhanced catalytic activity and stability is a key strategy to enable chemical energy conversion. The vast chemical space of intermetallic phases offers plenty of opportunities to discover OER electrocatalysts with improved performance. Herein we report intermetallic nickel germanide (NiGe) acting as a superior activity and durable Ni‐based electro(pre)catalyst for OER. It is produced from a molecular bis(germylene)‐Ni precursor. The ultra‐small NiGe nanocrystals deposited on both nickel foam and fluorinated tin oxide (FTO) electrodes showed lower overpotentials and a durability of over three weeks (505 h) in comparison to the state‐of‐the‐art Ni‐, Co‐, Fe‐, and benchmark NiFe‐based electrocatalysts under identical alkaline OER conditions. In contrast to other Ni‐based intermetallic precatalysts under alkaline OER conditions, an unexpected electroconversion of NiGe into γ‐NiIIIOOH with intercalated OH−/CO32− transpired that served as a highly active structure as shown by various ex situ methods and quasi in situ Raman spectroscopy.

In a green energy economy, electrocatalysis is essential for chemical energy conversion and to produce value added chemicals from regenerative resources. To be widely applicable, an electrocatalyst should comprise the Earth's crust's most abundant elements. The most abundant 3d metal, iron, with its multiple accessible redox states has been manifold applied in chemocatalytic processes. However, due to the low conductivity of FeIIIOxHy phases, its applicability for targeted electrocatalytic oxidation reactions such as water oxidation is still limited. Herein, it is shown that iron incorporated in conductive intermetallic iron silicide (FeSi) can be employed to meet this challenge. In contrast to silicon‐poor iron–silicon alloys, intermetallic FeSi possesses an ordered structure with a peculiar bonding situation including covalent and ionic contributions together with conducting electrons. Using in situ X‐ray absorption and Raman spectroscopy, it could be demonstrated that, under the applied corrosive alkaline conditions, the FeSi partly forms a unique, oxidic iron(III) phase consisting of edge and corner sharing [FeO6] octahedra together with oxidized silicon species. This phase is capable of driving the oxyge evolution reaction (OER) at high efficiency under ambient and industrially relevant conditions (500 mA cm−2 at 1.50 ± 0.025 VRHE and 65 °C) and to selectively oxygenate 5‐hydroxymethylfurfural (HMF).

The single source precursor (SSP) approach was used to prepare highly active CoP bifunctional electro(pre) catalysts for the oxygen evolution reaction (OER), hydrogen evolution reaction (HER) and overall water splitting (OWS) reaction starting from a molecular b-diketiminato Co(I) cyclo-P 4 complex. Crystalline or amorphous CoP particles were attained depending on the preparation route. Notably, the amorphous CoP displayed higher activity compared to the crystalline CoP on nickel foam (NF) and fluorinated tin oxide (FTO) substrates due to its unique electronic properties and surface characteristics. During the OER, severe oxidation to Co-oxy(hydroxides)/oxides by the loss of P was found to be crucial to increase the concentration of CoO x active sites. Interestingly, complete leaching of surface P from CoP and surface Co enrichment occurred during the HER. Finally, an OWS device was fabricated where the amorphous CoP outperformed the crystalline CoP with respect to low OWS cell voltage (with a difference of 130 mV) and enhanced stability for 5 days.

In the urge of designing noble metal‐free and sustainable electrocatalysts for oxygen evolution reaction (OER), herein, a mineral Digenite Cu9S5 has been prepared from a molecular copper(I) precursor, [{(PyHS)2CuI(PyHS)}2](OTf)2 (1), and utilized as an anode material in electrocatalytic OER for the first time. A hot injection of 1 yielded a pure phase and highly crystalline Cu9S5, which was then electrophoretically deposited (EPD) on a highly conducting nickel foam (NF) substrate. When assessed as an electrode for OER, the Cu9S5/NF displayed an overpotential of merely 298±3 mV at a current density of 10 mA cm−2 in alkaline media. The overpotential recorded here supersedes the value obtained for the best reported Cu‐based as well as the benchmark precious‐metal‐based RuO2 and IrO2 electrocatalysts. In addition, the choronoamperometric OER indicated the superior stability of Cu9S5/NF, rendering its suitability as the sustainable anode material for practical feasibility. The excellent catalytic activity of Cu9S5 can be attributed to the formation of a crystalline CuO overlayer on the conductive Cu9S5 that behaves as active species to facilitate OER. This study delivers a distinct molecular precursor approach to produce highly active copper‐based catalysts that could be used as an efficient and durable OER electro(pre)catalysts relying on non‐precious metals.