No abstract

It is commonly recommended to incorporate diesel generators into distributed hybrid renewable energy systems (HRESs) to lower the system's total cost and make the generated electricity affordable. Due to the environmental and economic issues associated with fossil fuel use, biomass power technologies (BPT) appear to be an attractive alternative to diesel generators. The HOMER software was used to model, simulate, and optimise two photovoltaic/wind/battery systems integrated with different BPT (anaerobic digestion or gasification) to satisfy the electrical needs of Babadam, a remote community in northern Cameroon. The results indicated that the anaerobic digester integrated system's overall optimal architecture included a 98.1 kW photovoltaic array, a 30 kW biogas generator, and 200 batteries, with a cost of energy (COE) of $0.347/kWh. On the other hand, the gasifier integrated option is made up of an 81.8 kW photovoltaic array, a 15 kW syngas generator, and 200 batteries and has a COE of $0.319/kW. Additionally, compared to the PV/Wind/Battery system, integrating the biogas (resp. syngas) generator showed a potential COE decrease of 29% (resp. 40%). The sensitivity analysis highlighted the validity of this COE reduction potential everywhere in sub-Saharan Africa, leading to the conclusion that integrating BPT into HRESs can effectively contribute to Sustainable Development Goal 7.This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.

Renewable energy sources are becoming a greater component of the electrical mix, while being significantly more volatile than conventional energy sources. As a result, net stability and availability pose significant challenges. Energy-intensive processes, such as chlor-alkali electrolysis, can potentially adjust their consumption to the available power, which is known as demand side management or demand response. In this study, a dynamic model of a chlor-alkali membrane cell is developed to assess the flexible potential of the membrane cell. Several improvements to previously published models were made, making the model more representative of state-of-the-art CA plants. By coupling the model with a wind power profile, the current and potential level over the course of a day was simulated. The simulation results show that the required ramp rates are within the regular operating possibilities of the plant for most of the time and that the electrolyte concentrations in the cell can be kept at the right level by varying inlet flows and concentrations. This means that a CA plant can indeed be flexibly operated in the future energy system.

No abstract