Dough fermentation in gluten-free bakery products is problematic due to the absence of gluten, which provides advantageous rheological properties. A thermodynamic sensor (TDS) system combined with an electronic nose was tested as an alternative to conventional methods monitoring dough development based on mechanical properties. In the first part, the configuration of the sensors in the thermodynamic system and their response to different heat-source positions, which significantly affect the output signal from the measurement system, were investigated. The practical contribution lies in the application of the measurements to the example of gluten-free doughs with and without edible insect enrichment. An optimized configuration of the thermodynamic system (one sensor on the inner wall of the container at the bottom and another in the middle of the container closer to the top of the dough) in combination with an experimental electronic nose was used for the aforementioned measurement. In some cases, up to 87% correlation between the signal from the TDS and the signals from a professional rheofermentometer Rheo F-4 (Chopin) was demonstrated. The differences between the results can be explained by the use of different techniques. Using a combination of sensor systems in one place, one time and one sample can lead to more comprehensive and robust results. Furthermore, it was shown that the fermentation activity increased in corn dough with the addition of insects compared to dough without the addition. In rice flour dough with the addition of edible insects, fermentation activity was similar to that of the flour without the addition.

The flours from pigmented and glutinous rice have a great potential to increase the nutritional quality of gluten-free breads. The characteristics of whole-meal fine flours, slurries, doughs, and breads prepared from black, red, and white glutinous rice were, therefore, compared with commercially used refined fine and semi-coarse white rice flours. The pasting properties of different flours were strongly influenced by the type of rice they were made from. Slurries with red and glutinous flours exhibited a shift to a lower pasting temperature T0, lower values of ηPeak and ηFinal, as well as higher values of the breakdown and setback region than the slurries with refined flours. The slurry with black flour exhibited high values of viscosity η0 and breakdown, together with low values of ηFinal, setback region and total setback. Bread characteristics were strongly correlated with the pasting properties. The presence of bran particles did not negatively impact loaf volume, crumb hardness, springiness, and chewiness. Some defects were observed in glutinous and red rice bread. Fine flour exhibited better baking performance than semi-coarse flour. Glutinous flour has the potential to become an ingredient in gluten-free baking. The applicability of various black and red rice flours may be limited by the flavor and the taste.

The effect of botanical origin, the flour particle size, and the content of damaged starch on flour pasting properties, dough behavior during a uniaxial deformation test, and bread characteristics were evaluated on rice and buckwheat flours. The rice flour with a median particle size D(0.5) of 60.2, 70.6, 106.8, and 189.4 μm, and buckwheat flour with a D(0.5) of 56.4, 68.4, and 95.8 μm were prepared using the same milling technology. The botanical origin of the flours was the strongest factor influencing the flour pasting properties, stress accumulated in dough during the uniaxial deformation test, loaf characteristics, texture, and sensory characteristics of breads. The flour particle size significantly influenced mainly the flour pasting properties. The effect of the content of damaged starch was the weakest among the studied factors. The flour particle size and the content of damaged starch were closely related. The flour botanical origin was the strongest factor; therefore, it seems not to be possible to predict the bread-baking potential of gluten-free flours based on the results obtained for flour of a different botanical origin. More research on flours from different plants prepared by the same milling process is required to support this hypothesis.

No abstract

No abstract