Purpose: The aims of this study were to 1) investigate the effects of femoral drilling angle in coronal and sagittal planes on the stress and strain distribution around the femoral and tibial tunnel entrance and the stress distribution on the graft, following anterior cruciate ligament reconstruction (ACLR), 2) identify the optimal femoral drilling angle to reduce the risk of the tunnel enlargement and graft failure.Methods: A validated three-dimensional (3D) finite element model of a healthy right cadaveric knee was used to simulate an anatomic ACLR with the anteromedial (AM) portal technique. Combined loading of 103.0 N anterior tibial load, 7.5 Nm internal rotation moment, and 6.9 Nm valgus moment during normal human walking at joint flexion of 20° was applied to the ACLR knee models using different tunnel angles (30°/45°/60° and 45°/60° in the coronal and sagittal planes, respectively). The distribution of von Mises stress and strain around the tunnel entrances and the graft was calculated and compared among the different finite element ACLR models with varying femoral drilling angles.Results: With an increasing coronal obliquity drilling angle (30° to 60°), the peak stress and maximum strain on the femoral and tibial tunnel decreased from 30° to 45° and increased from 45° to 60°, respectively. With an increasing sagittal obliquity drilling angle (45° to 60°), the peak stress and the maximum strain on the bone tunnels increased. The lowest peak stress and maximum strain at the ACL tunnels were observed at 45° coronal/45° sagittal drilling angle (7.5 MPa and 7,568.3 μ-strain at the femoral tunnel entrance, and 4.0 MPa and 4,128.7 μ-strain at the tibial tunnel entrance). The lowest peak stress on the ACL graft occurred at 45° coronal/45° sagittal (27.8 MPa) drilling angle.Conclusions: The femoral tunnel drilling angle could affect both the stress and strain distribution on the femoral tunnel, tibial tunnel, and graft. A femoral tunnel drilling angle of 45° coronal/ 45° sagittal demonstrated the lowest peak stress, maximum strain on the femoral and tibial tunnel entrance, and the lowest peak stress on the ACL graft.

BackgroundThe deformity of the proximal femur and acetabular in patients with developmental dysplasia of the hip (DDH) renders an intraoperative decision for ideal component placement challenging. We hypothesized that the altered morphology of calcar femorale (CF) in DDH patients changed the fixation mechanism of the cementless metaphyseal-filling stem and aimed to predict stem anteversion using proximal femoral anatomical parameters from preoperative CT.MethodsPreoperative and postoperative CT scans of 34 DDHs with a metaphyseal-filling stem in THA were retrospectively analyzed. Proximal femoral anatomical parameters, including the femoral anteversion (FA) and the CF angles at the low femoral neck (LFN) and the center of the lesser trochanter (CLT) levels (FA-LFN, FA-CLT, CF-LFN, and CF-CLT) were measured. The dysplastic hips were divided into the CF group (n = 21) and the non-CF group (n = 13) according to the presence of the CF-LFN. The association between the anatomical parameters and the postoperative stem anteversion was statistically analyzed, and the predicted stem anteversion was compared with postoperative stem anteversion.ResultsIn the CF group, the combination of the CF-LFN and FA-CLT exhibited a strong positive correlation (R = 0.870, p < 0.001) with the postoperative stem anteversion. In the non-CF group, only the FA-LFN had a strong positive correlation (R = 0.864, p < 0.001). Average prediction errors were 5.9° and 6.4° in the CF and non-CF groups.ConclusionsThe presence of CF-LFN is related to the press-fit mechanism of the metaphyseal-filling stem, and the preoperative measurements from CT images can be employed as a tool to predict postoperative stem anteversion in DDH patients.

BackgroundThe purpose of this study was to investigate the relationship between the three dimensional (3D) femoral head displacement in patients with developmental dysplasia of the hip (DDH) and Crowe classification.MethodsRetrospectively, CT scans of 60 DDH patients and 55 healthy demography-matched healthy control subjects were analyzed. Using the anterior pelvic plane a pelvic anatomic coordinate system was established. The center coordinates of the femoral heads of both the DDH patients and control subjects were quantified relative to the pelvic coordinate system and were mapped proportionally to a representative normal pelvis for comparison.ResultsIn the anteroposterior (AP) direction, the center of the femoral head was significantly more anterior in the DDH patients (type I, II, and III, respectively45.0 ± 5.5, 42.9 ± 7.1, and 43.9 ± 4.6 mm) when compared to the controls (50.0 ± 5.2 mm) (p < 0.001 for all). In the medial-lateral (ML) direction, the center of the femoral head was significantly more lateral in the DDH patients (type I, II, and III =103.5 ± 8.6, 101.5 ± 6.6, 102.1 ± 11.2 mm) when compared to the controls (87.5 ± 5.1 mm) (p < 0.001 for all). In the superior-inferior (SI) direction, the center of the femoral head was significantly more proximal in the DDH patients (type I, II, and III =62.4 ± 7.3, 50.0 ± 6.3, and 43.2 ± 6.6 mm) when compared to the controls (66.0 ± 6.2 mm) (p < 0.001 for all).ConclusionsThe severity of DDH using the Crowe classification was related to the degree of the femoral head displacement in the SI direction, but not in the ML or AP directions. By assessing the 3D femoral head displacement in DDH patients, individualized component positioning might benefit surgical outcome.