Historically, most testing with shallow buried charges has focussed on soils which are predominantly quartz (silica)-based. Particle size, moisture content and density have previously been investigated to ascertain their importance, along with other geotechnical parameters, in governing the magnitude of an impulsive output. This has shown that, in order of importance, moisture content, density and particle size drive the total impulse imparted. The work in this paper presents the results of blast testing carried out with carbonate sands to investigate the difference that particle mineralogy (and hence, propensity for breakage) has on both the localised loading and the total impulse using an array of 17 Hopkinson pressure bars known as the Characterisation of Blast Loading (CoBL) apparatus. Carbonate sands are thought to have more friable particles due to their plate-like morphology, as opposed to the rounded morphology of quartz-based sands. Testing was conducted with low moisture content samples and compared with the well-established Leighton Buzzard uniform sand to isolate the effect of particle mineralogy/morphology on the loadings measured. The results show that, despite attaining a 23% lower bulk density, carbonate soils deliver almost identical total impulses (0.7–3.0% higher) when compared with quartz soils for nominally identical moisture contents.

Buried charges pose a serious threat to both civilians and military personnel. It is well established that soil properties have a large influence on the magnitude and variability of loading from explosive blasts in buried conditions. In this study, work has been undertaken to improve techniques for processing pressure data from discrete measurement apparatus; this is performed through the testing of truncation methodologies and the area integration of impulses, accounting for the particle size distribution (PSD) of the soils used in testing. Two experimental techniques have been investigated to allow for a comparison between a global impulse capture method and an area-integration procedure from a Hopkinson Pressure Bar array. This paper explores an area-limiting approach, based on particle size distribution, as a possible approach to derive a better representation of the loading on the plate, thus demonstrating that the spatial distribution of loading over a target can be related to the PSD of the confining material.