The use of natural fibers in reinforced composites to produce eco-friendly materials is gaining more attention due to their attractive features such as low cost, low density and good mechanical properties, among others. This work thus investigates the potential of waste abaca (Manila hemp) fiber as reinforcing agent in an inorganic aluminosilicate material known as geopolymer. In this study, the waste fibers were subjected to different chemical treatments to modify the surface characteristics and to improve the adhesion with the fly ash-based geopolymer matrix. Definitive screening design of experiment was used to investigate the effect of successive chemical treatment of the fiber on its tensile strength considering the following factors: (1) NaOH pretreatment; (2) soaking time in aluminum salt solution; and (3) final pH of the slurry. The results show that the abaca fiber without alkali pretreatment, soaked for 12 h in Al2(SO4)3 solution and adjusted to pH 6 exhibited the highest tensile strength among the treated fibers. Test results confirmed that the chemical treatment removes the lignin, pectin and hemicellulose, as well as makes the surface rougher with the deposition of aluminum compounds. This improves the interfacial bonding between geopolymer matrix and the abaca fiber, while the geopolymer protects the treated fiber from thermal degradation.

Death due to diseases from poor sanitation is a serious global issue and it has become one of the priorities of the United Nations' Sustainable Development Goals (i.e., SDG6). This SDG6 aims to provide adequate improved sanitation facilities to over 2.3 billion people around the world who have no or limited access to sanitation, wherein more than two-thirds of these un-served people live in rural areas. One of the strategies for addressing this global issue is through emerging sustainable sanitation technologies such as the Eco-Toilet System (ETS), which uses small amounts of water or is even waterless and recovers nutrients from human waste thereby promoting water-energy conservation, improved sanitation and supplement nutrients essential to plant growth. Social acceptance, however, remains a key barrier in deploying the ETS. A social perception study on the use of the ETS was conducted in a rural community in Mulanay, Philippines. The researchers analyzed the proposed combined technology acceptance model and theory of planned behavior (C-TAM-TPB) using multiple linear regression and the Mann-Whitney U-test to evaluate the perceptions and attitudes of a rural community towards the use of the ETS. The results showed that more than 50% of the respondents are aware of the nutrient value of human excreta and believe that it is usable as fertilizer; however, less than 25% prefer to utilize it for food production. Results also indicate that the behavior of the users is driven by their attitude (β = 0.420, p-value < 0.010). Moreover, the Mann-Whitney U-test results revealed that people who are knowledgeable of the nutrient value of human excreta and are willing to collect them have more positive attitude towards the ETS.

Aluminosilicate minerals have become an important resource for an emerging sustainable material for construction known as geopolymer. Geopolymer, an alkali-activated material, is becoming an attractive alternative to Portland cement because of its lower carbon footprint and embodied energy. However, the synthesis process requires typically a two-part system for alkali activation wherein the solid geopolymer precursor is mixed with aqueous alkali solutions. These alkali activators are corrosive and may be difficult to handle in the field-scale application. In this study, a one-part geopolymer in which coal fly ash was mixed with solid alkali activators such as sodium hydroxide and sodium silicate to form a powdery cementitious binder was developed. This binder mixed with soil only requires water to form the soil-fly ash (SO-CFA) geopolymer cement, which can be used as stabilized soil for backfill/foundation. This geopolymer product was then evaluated for chemical stability by immersing the material with 5% by weight of sulfuric acid solution for 28 days. Indication suggests that the geopolymer exhibited high resistance against acid attack with an observed increase of unconfined compressive strength even when the immersion time in acidic solution was increased to 56 days. The mineralogical phase, microstructure, and morphology of the material were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), respectively. Results not only confirmed the formation of gypsum due to acid attack but also indicated the dissolution of anorthite and albite that may have caused the microstructure to be composed of sodium aluminosilicate hydrate (N–A–S–H) and calcium (alumino) silicate hydrate (C(–A)–S–H) with poly(ferro-sialate-siloxo) and poly(ferro-sialate-disiloxo) networks. A column leaching test with deionized water was also performed on the soil-fly ash geopolymer to study the leachability of metals in the material. Results showed that arsenic exhibits higher mobility in the geopolymer as compared to that of cadmium, chromium, and lead.

The Integrated Water System (IWS) offers alternative water and sanitation services that can potentially benefit rural communities experiencing water scarcity. The IWS described in this study comprises three systems: The Rainwater Harvesting System (RWHS), Water Treatment System (WTS), and Eco-Toilet System (ETS). RWHS and WTS make use of rainwater, which can be utilized for several domestic uses, especially during wet season. ETS has several benefits to users including promotion of environmental and public health, as well as food security. Despite the potential benefits of the IWS components, the perceived acceptance of its users threatens the success of its implementation. This study focuses on determining the significant factors that can influence the social acceptance of IWS in the Municipality of Mulanay, Quezon Province, Philippines. This study considers behavioral intention as an indicator of social acceptance of the IWS components. The framework of this study is based on the combined technology acceptance model and theory of planned behavior (C-TAM-TPB) concept. C-TAM-TPB was analyzed using Partial Least Square–Structural Equation Modeling (PLS–SEM). The result of the C-TAM-TPB evaluation reveals that the user’s attitude towards use (ATU), including its significant predictors, can promote behavioral intention towards use of the IWS components. This study can further improve the development of IWS projects.

Geopolymer cement has been popularly studied nowadays compared to ordinary Portland cement because it demonstrated superior environmental advantages due to its lower carbon emissions and waste material utilization. This paper focuses on the formulation of geopolymer cement from nickel–laterite mine waste (NMW) and coal fly ash (CFA) as geopolymer precursors, and sodium hydroxide (SH), and sodium silicate (SS) as alkali activators. Different mix formulations of raw materials are prepared to produce a geopolymer based on an I-optimal design and obtained different compressive strengths. A mixed formulation of 50% NMW and 50% CFA, SH-to-SS ratio of 0.5, and an activator-to-precursor ratio of 0.429 yielded the highest 28 d unconfined compressive strength (UCS) of 22.10 ± 5.40 MPa. Furthermore, using an optimized formulation of 50.12% NMW, SH-to-SS ratio of 0.516, and an activator-to-precursor ratio of 0.428, a UCS value of 36.30 ± 3.60 MPa was obtained. The result implies that the synthesized geopolymer material can be potentially used for concrete structures and pavers, pedestrian pavers, light traffic pavers, and plain concrete.