No abstract

AbstractMixed matrix membrane (MMM), formed by dispersing fillers in polymer matrix, has attracted researchers’ attention due to its outstanding performance compared to polymeric membrane. However, its widespread use is limited due to high cost of the commercial filler which leads to the studies on alternative low-cost fillers. Recent works have focused on utilizing agricultural wastes as potential fillers in fabricating MMM. A membrane with good permeability and selectivity was able to be prepared at low cost. The objective of this review article is to compile all the available information on the potential agricultural wastes as fillers in fabricating MMM for gas separation application. The gas permeation mechanisms through polymeric and MMM as well as the chemical and physical properties of the agricultural waste fillers were also reviewed. Additionally, the economic study and future direction of MMM development especially in gas separation field were discussed.

Six resins (Amberlite XAD-16, Amberlite XAD-2, Sepabeads SP207, DIAION HP-20, DM11 and H103) were tested for vanillin adsorption in aqueous solution. All of the resins gave more than 95% adsorption rate except for Amberlite XAD-2 and DM11. Resin H103 was selected for the subsequent work due to its high adsorption capacity and low cost. A kinetic analysis revealed that the adsorption process followed pseudo-second-order kinetic model and occurred rapidly. The equilibrium point was reached after 90 minutes of reaction. Adsorption isotherm was also determined at 25 °C and it was fitted to Langmuir and Freundlich equations using linear regression and non-linear regression (sum of squares) methods. The regression shows that the adsorption of vanillin onto resin H103 followed Langmuir model (R 2 = 0.9984) with a maximum capacity of 73.015 mg/g. .my (S. Abd-Aziz).Note: The experiment was done in duplicates at 25 °C and 150 rpm (0.5 g resin, 100 ml of vanillin solution at 50 mg/l). The data were taken after 180 minutes of reaction.

No abstract