The structure and flow behavior of a concentrated aqueous solution (45 wt %) of the ubiquitous linear sodium alkylbenzenesulfonate (NaLAS) surfactant is investigated by microfluidic small-angle X-ray scattering (SAXS) at 70 °C. NaLAS is an intrinsically complex mixture of over 20 surfactant molecules, presenting coexisting micellar (L1) and lamellar (Lα) phases. Novel microfluidic devices were fabricated to ensure pressure and thermal resistance, ability to handle viscous fluids, and low SAXS background. Polarized light optical microscopy showed that the NaLAS solution exhibits wall slip in microchannels, with velocity profiles approaching plug flow. Microfluidic SAXS demonstrated the structural spatial heterogeneity of the system with a characteristic length scale of 50 nL. Using a statistical flow-SAXS analysis, we identified the micellar phase and multiple coexisting lamellar phases with a continuous distribution of d spacings between 37.5 and 39.5 Å. Additionally, we showed that the orientation of NaLAS lamellar phases is strongly affected by a single microfluidic constriction. The bilayers align parallel to the velocity field upon entering a constriction and perpendicular to it upon exiting. On the other hand, multilamellar vesicle phases are not affected under the same flow conditions. Our results demonstrate that despite the compositional complexity inherent to NaLAS, microfluidic SAXS can rigorously elucidate its structure and flow response.

KingdomThe crystallization mechanisms and kinetics of micellar sodium dodecyl sulfate (SDS) solutions in water, under isothermal conditions, were investigated experimentally by a combination of reflection optical microscopy (OM), differential scanning calorimetry (DSC) and attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR). The rates of nucleation and growth were estimated from OM and DSC across temperatures ranging from 20 to -6 °C for 20% SDS-H 2 O, as well as for 10 and 30% SDS-H 2 O at representative temperatures of 6, 2 and -2 °C. A decrease in temperature increased both nucleation and growth rates, and the combined effect of the two processes on the morphology was quantified via both OM and ATR-FTIR. Needles, corresponding to the hemihydrate polymorph, become the dominant crystal form at ≤-2 °C, while platelets, the monohydrate, predominate at higher temperatures. Above 8 °C, crystallization was only observed if seeded from crystals generated at lower temperatures. Our results provide quantitative and morphological insight into the crystallization of ubiquitous micellar SDS solutions and its phase stability below room temperature. ABSTRACT:The crystallization mechanisms and kinetics of micellar sodium dodecyl sulfate (SDS) solutions in water, under isothermal conditions, were investigated experimentally by a combination of reflection optical microscopy (OM), differential scanning calorimetry (DSC) and attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR). The rates of nucleation and growth were estimated from OM and DSC across temperatures ranging from 20 to -6 °C for 20% SDS-H 2 O, as well as for 10 and 30% SDS-H 2 O at representative temperatures of 6, 2 and -2 °C. A decrease in temperature increased both nucleation and growth rates, and the combined effect of the two processes on the morphology was quantified via both OM and ATR-FTIR. Needles, corresponding to the hemihydrate polymorph, become the dominant crystal form at ≤-2 °C, while platelets, the monohydrate, predominate at higher temperatures. Above 8 °C, crystallization was only observed if seeded from crystals generated at lower temperatures. Our results 3 provide quantitative and morphological insight into the crystallization of ubiquitous micellar SDS solutions and its phase stability below room temperature.

We report a microfluidic approach to perform small angle neutron scattering (SANS) measurements of contrast variation and matching, extensively employed in soft and biological matter research. We integrate a low scattering background microfluidic mixer and serpentine channel in a SANS beamline to yield a single phase, continuous flow, reconfigurable liquid cell. By contrast with conventional, sequential measurements of discrete (typically 4-6) solutions of varying isotopic solvent composition, our approach continually varies solution composition during SANS acquisition. We experimentally and computationally determine the effects of flow dispersion and neutron beam overillumination of microchannels in terms of the composition resolution and precision. The approach is demonstrated with model systems: HO/DO mixtures, a surfactant (sodium dodecyl sulfate, SDS), a triblock copolymer (pluronic F127), and silica nanoparticles (Ludox) in isotopic aqueous mixtures. The system is able to zoom into a composition window to refine contrast matching conditions, and robustly resolve solute structure and form factors by simultaneous fitting of scattering data with continuously varying contrast. We conclude by benchmarking our microflow-SANS with the discrete approach, in terms of volume required, composition resolution and (preparation and measurement) time required, proposing a leap forward in equilibrium, liquid solution phase mapping and contrast variation by SANS.

The crystallization kinetics of sodium dodecyl sulfate (SDS)-water micellar solutions, under linear cooling conditions, were experimentally investigated using optical microscopy, differential scanning calorimetry, and infrared spectroscopy. Cooling rates were systematically varied, from 0.1 to 50 °C min–1, encompassing environmental to near-“isothermal” temperature changes, between 22 and −5 °C, for a reference concentration of 20% SDS-H2O. The cooling rate was shown to determine the dominant crystal morphologies, with platelets and needles predominating at the lowest and highest rates, respectively. The results were rationalized in terms of isothermal crystallization data and the time–temperature cooling profile. Rates 0.1, 5.0, and 10 °C min–1 yield morphologies and kinetics analogous to those of isothermal quenches at the corresponding crystallization temperature window. Nontrivial deviations were observed for intermediate rates (0.5, 1.0 °C min–1), due to commensurate changes in temperature and crystallization mechanism, accompanied by solute depletion. The polythermal metastable zone width was estimated, and the non-isothermal nucleation described by the Nývlt equation, while the Avrami and Kissinger models described overall crystallization kinetics. Our measurements quantify the impact of temperature gradients in the crystallization of ubiquitous SDS micellar solutions, for a range of practically relevant profiles incurred during manufacturing and storage

Kinetic and morphological insight into the crystallisation of micellar SDS–H2O solutions using small quantities of structurally similar additives.