The use of unmanned aerial vehicles (UAVs) as communication platforms is of great practical significance in future wireless networks, especially for on-demand deployment in temporary events and emergency situations. Although prior works have shown the performance improvement by exploiting the UAV's mobility, they mainly focus on delay-tolerant applications. As delay requirements fundamentally limit the UAV's mobility, it remains unknown whether the UAV is able to provide any performance gain in delay-constrained communication scenarios. Motivated by this, we study in this paper a UAV-enabled orthogonal frequency division multiple access (OFDMA) network where a UAV is dispatched as a mobile base station (BS) to serve a group of users on the ground. We consider a minimum-rate ratio (MRR) for each user, defined as the minimum instantaneous rate required over the average achievable throughput, to flexibly adjust the percentage of its delay-constrained data traffic. Under a given set of constraints on the users' MRRs, we aim to maximize the minimum average throughput of all users by jointly optimizing the UAV trajectory and OFDMA resource allocation. First, we show that the max-min throughput in general decreases as the users' MRR constraints become more stringent, which reveals a fundamental throughputdelay tradeoff in UAV-enabled communications. Next, we propose an iterative parameter-assisted block coordinate descent method to optimize the UAV trajectory and OFDMA resource allocation alternately, by applying the successive convex optimization and the Lagrange duality, respectively. Furthermore, an efficient and systematic UAV trajectory initialization scheme is proposed based on a simple circular trajectory. Finally, simulation results are provided to verify our theoretical findings and demonstrate the effectiveness of our proposed designs. Index TermsThe authors are with the

Unmanned aerial vehicles (UAVs) have recently gained growing popularity in wireless communications owing to their many advantages such as swift and cost-effective deployment, line-of-sight (LoS) aerial-to-ground link, and controllable mobility in three-dimensional (3D) space. Although prior works have exploited the UAV's mobility to enhance the wireless communication performance under different setups, the fundamental capacity limits of UAV-enabled/aided multiuser communication systems have not yet been characterized. To fill this gap, we consider in this paper a UAV-enabled two-user broadcast channel (BC), where a UAV flying at a constant altitude is deployed to send independent information to two users at different fixed locations on the ground. We aim to characterize the capacity region of this new type of BC over a given UAV flight duration, by jointly optimizing the UAV's trajectory and transmit power/rate allocations over time, subject to the UAV's maximum speed and maximum transmit power constraints. First, to draw essential insights, we consider two special cases with asymptotically large/low UAV flight duration/speed, respectively. For the former case, it is shown that a simple hoverfly-hover (HFH) UAV trajectory with time division multiple access (TDMA) based orthogonal multiuser transmission is capacity-achieving; while in the latter case, the UAV should hover at a fixed location that is nearer to the user with larger achievable rate and in general superposition coding (SC) based non-orthogonal transmission with interference cancellation at the receiver of the nearer user is required.Next, we consider the general case with finite UAV speed and flight duration. We show that the optimal UAV trajectory should follow a general HFH structure, i.e., the UAV successively hovers at a pair of initial and final locations above the line segment of the two users each with a certain amount of time and flies unidirectionally between them at the maximum speed, and SC is generally needed. Furthermore, when TDMA-based transmission is considered for low-complexity implementation, we show that the optimal UAV trajectory still follows a HFH structure, but the hovering locations can only be those above the two users. Finally, simulation results are provided to verify our analysis, which also reveal useful guidelines to the practical design of UAV trajectory and communication jointly. Index TermsUAV-enabled communication, broadcast channel (BC), capacity region, trajectory design, power allocation.

No abstract

This paper studies a new unmanned aerial vehicle (UAV)-enabled wireless power transfer (WPT) system, where a UAV-mounted energy transmitter (ET) broadcasts wireless energy to charge distributed energy receivers (ERs) on the ground. In particular, we consider a basic two-user scenario, and investigate how the UAV can optimally exploit its mobility to maximize the amount of energy transferred to the two ERs during a given charging period. We characterize the achievable energy region of the two ERs, by optimizing the UAV's trajectory subject to a maximum speed constraint. We show that when the distance between the two ERs is smaller than a certain threshold, the boundary of the energy region is achieved when the UAV hovers above a fixed location between them for all time; while when their distance is larger than the threshold, to achieve the boundary of the energy region, the UAV in general needs to hover and fly between two different locations above the line connecting them. Numerical results show that the optimized UAV trajectory can significantly improve the WPT efficiency and fairness of the two ERs, especially when the UAV's maximum speed is large and/or the charging duration is long.Index Terms-Wireless power transfer, unmanned aerial vehicle (UAV), energy region, trajectory design.

This paper considers an unmanned aerial vehicle (UAV)-enabled wireless sensor network (WSN) in urban areas, where a UAV is deployed to collect data from distributed sensor nodes (SNs) within a given duration. To characterize the occasional building blockage between the UAV and SNs, we construct the probabilistic line-of-sight (LoS) channel model for a Manhattan-type city by using the combined simulation and data regression method, which is shown in the form of a generalized logistic function of the UAV-SN elevation angle. We assume that only the knowledge of SNs' locations and the probabilistic LoS channel model is known a priori, while the UAV can obtain the instantaneous LoS/Non-LoS channel state information (CSI) with the SNs in real time along its flight. Our objective is to maximize the minimum (average) data collection rate from all the SNs for the UAV. To this end, we formulate a new rate maximization problem by jointly optimizing the UAV three-dimensional (3D) trajectory and transmission scheduling of SNs. Although the optimal solution is intractable due to the lack of the complete UAV-SNs CSI, we propose in this paper a novel and general design method, called hybrid offline-online optimization, to obtain a suboptimal solution to it, by leveraging both the statistical and real-time CSI. Essentially, our proposed method decouples the joint design of UAV trajectory and communication scheduling into two phases: namely, an offline phase that determines the UAV path prior to its flight based on the probabilistic LoS channel model, followed by an online phase that adaptively adjusts the UAV flying speeds along the offline optimized path as well as communication scheduling based on the instantaneous UAV-SNs CSI and SNs' individual amounts of data received accumulatively.Extensive simulation results are provided to show the significant rate performance improvement of our proposed design as compared to various benchmark schemes. Index TermsUAV communications, wireless sensor network, 3D trajectory optimization, probabilistic LoS channel, hybrid offline-online design.Part of this work has been submitted