Prussian blue analogs (PBAs) featuring large interstitial voids and rigid structures are broadly recognized as promising cathode materials for sodium-ion batteries. Nevertheless, the conventionally prepared PBAs inevitably suffer from inferior crystallinity and lattice defects, leading to low specific capacity, poor rate capability, and unsatisfied long-term stability. As the Na+ migration within PBAs is directly dependent on the periodic lattice arrangement, it is of essential significance to improve the crystallinity of PBAs and hence ensure long-range lattice periodicity. Herein, a chemical inhibition strategy is developed to prepare a highly crystallized Prussian blue (Na2Fe4[Fe­(CN)6]3), which displays an outstanding rate performance (78 mAh g–1 at 100 C) and long life-span properties (62% capacity retention after 2000 cycles) in sodium storage. Experimental results and kinetic analyses demonstrate the efficient electron transfer and smooth ion diffusion within the bulk phase of highly crystallized Prussian blue. Moreover, in situ X-ray diffraction and in situ Raman spectroscopy results demonstrate the robust crystalline framework and reversible phase transformation between cubic and rhombohedral within the charge–discharge process. This research provides an innovative way to optimize PBAs for advanced rechargeable batteries from the perspective of crystallinity.

Low cost is the eternal theme for any commercial production. Numerous efforts have been explored to realize low-cost, high-efficiency perovskite solar cells (PSCs), such as replacing the traditional spin-coating method with an economical printing strategy, simplifying the device structure, reducing the number of functional layers, etc. However, there are few reports on the use of low-cost precursors. Herein, we enable the low-cost fabrication of efficient PSCs based on a very cheaper low-purity PbI2 via powder engineering. The low-purity PbI2 is blended with formamidinium iodide followed by dissolving in a 2-methoxyethanol solvent, and then, the high-quality FAPbI3 powders are formed via an inverse temperature crystallization process and solvent washing after several simple processes to reduce the impurities. As a result, the devices fabricated using the as-synthesized black powders based on the low-purity PbI2 exhibit a champion power conversion efficiency (PCE) of 23.9% and retained ∼95% of the initial PCE after ∼400 h of storage in the conditions of 25 ± 5 °C and 25 ± 5 RH% without encapsulation. In addition, the upscaling fabrication of a 5 cm × 5 cm solar minimodule also demonstrates an impressive efficiency of 19.5%. Our findings demonstrate an economic strategy for the commercialization of PSCs from the perspective of low-cost production.