Purpose The purpose of this paper is to systematically investigate the dynamic strain aging (DSA) effect in solid solution treated IN718 at different temperatures through experiments and simulations to gain an understanding of the inelastic deformation mechanisms. Design/methodology/approach In the present work, uniaxial tensile tests have been carried out in conjunction with finite element (FE) simulations to investigate the behaviour of the solid solution treated Inconel 718 superalloy at different temperatures and strain rates. Dynamic strain aging (DSA) effects, which manifested during the tests in the form of a negative strain rate sensitivity and stress serrations, are investigated. The most significant DSA effect occurs at 500°C and at a strain rate of 10–4 s-1. In a newly proposed rate-dependent constitutive formulation, the DSA model, proposed by McCormick, Kubin and Estrin, was introduced into slip-assisted solute hardening, and an activation energy-dependent exponential flow rule was adopted. Findings The observed negative strain rate sensitivity and stress serrations are well predicted by a 3 D FE. The FE results indicate that the equivalent plastic strain rate distribution in the specimen gauge length is as highly inhomogeneous as in the other materials exhibiting DSA effects such as aluminium and titanium alloy. During inelastic deformation, propagating high strain rate bands can be closely correlated to the stress serrations. Originality/value For the DSA effect in solid solution treated IN718, the existing researching mainly focuses on the mechanical properties experiment and microstructure observation. In this study, a constitutive formulation, combined with the DSA model, has been proposed, and the mechanical behaviors, including the DSA effect, have been well predicted by a finite element model.

The effects of Dynamic Strain Ageing (DSA) on residual stresses generated in Ni-base superalloys during heat treatments are not well understood. In this work, the residual stress field induced by water quenching an IN718 disc while undergoing DSA is studied using coupled thermo-mechanical finite element analyses in conjunction with neutron diffraction (ND) measurements. A visco-plastic constitutive model which incorporates the effect of DSA is proposed to describe the experimentally observed negative strain rate sensitivity and abnormal temperature dependence phenomena in the stress-strain response of solid solution treated IN718. The predicted quenching residual stresses in the disc agree well with the ND measurements. Due to the DSA, a propagating high plastic strain rate region can be identified in the disc during the early stages of the quenching process. Due to the negative strain rate sensitivity and abnormal temperature dependence effects caused by DSA, the predicted residual stresses are approximately 10% greater than when those two effects are not accounted for. The effects of different convection heat transfer conditions in the FE model are examined and discussed. It is found that the convection heat transfer coefficients have a great influence both on the disc residual stresses and DSA-related plastic strain rate field predictions.