A novel additive manufacturing approach is herein reported for manufacturing high mechanical strength continuous carbon fiber-reinforced silicon carbide (C f /SiC) composite materials. Continuous carbon fibers were coated with polycarbosilane (PCS) using a colloidal evaporative deposition process and then coextruded with high solid content SiC ink. The zeta potential of the SiC ink was adjusted to optimize the printing ability of the suspension. During sintering, small SiC grains and whiskers were generated in the gaps in and around the PCS-coated carbon fibers, which led to the improved flexural strength and density of the composites. Meanwhile, the PCS coating on the surface of the carbon fibers prevented the carbon fibers from reacting with SiO gas generated by reactions between the SiC matrix and SiO 2 and sintering additives (Al 2 O 3 and Y 2 O 3 ), effectively preserving the structural integrity of the carbon fibers. Compared to the SiC specimens containing uncoated carbon fibers, the density of the specimens fabricated with coated carbon fibers was increased from 2.51 to 2.85 g/cm 3 , and the strength was increased from 190 to 232 MPa.

High solids loading silicon carbide (SiC)-based aqueous slurries containing only .5 wt. % organic additives were utilized to create specimens of various geometries via an extrusion-based additive manufacturing (AM) technique. Pressureless electric field-assisted sintering was performed to densify each specimen without deformation. The combination of these techniques produced parts with >98% relative density despite containing only 5 wt.% oxide sintering additives. After sintering, specimens contained only the α-SiC and yttrium aluminum perovskite phases. This suggests the evolution of a nonequilibrium yttrium aluminate phase, as well as transformation from β-SiC to α-SiC. The fabrication method presented in this work has advantages over other AM techniques commonly used with SiC, because it does not require significant organic additives nor additional postprocessing steps such as chemical vapor infiltration or polymer impregnation and pyrolysis.

No abstract