No abstract

The discontinuous precipitation and dissolution in the alloy Al-Zn system has been the subject of many theoretical and experimental investigations that have contributed to the understanding of the different mechanisms which control them. However, many questions remain unanswered because of the complexity of the constituted phases which are affected by the speed of the quenched, deformation, the temperature of homogenization and ageing effect. The purpose of this work is to clarify the effect of temperature and deformation on the mechanisms of these two reactions during ageing of Al-15 at.% Zn and Al-30 at.% Zn alloy. The techniques of analysis used in this respect are the optical microscopy, the X-ray diffraction and the hardness Vickers

The study of the discontinuous precipitation reaction and the lamellar precipitate dissolution in the alloy Cu-In system provoked a considerable benefit and has been the subject of many theoretical and experimental investigations. The aim of this work is to make the evidence on the one hand the effect of the plastic deformation on the mechanism of the discontinuous precipitation reaction such as nucleation, growth and lamellar coarsening and in other hand the effect of temperature on the characteristics and front behavior movement of the opposite reaction (discontinuous dissolution). Different techniques of analysis have been used in this respect such as the optical microscopy, the differential thermal analysis and the microhardness Vickers. The obtained results confirm various works achieved in this field

The aim of this work is the demonstration of the effect of thermomechanical treatments on the properties of the alloy Al-5.8%Zn-2.7%Mg by thermal analysis techniques and calorimetry, which are methods of test widely used for research purposes and quality control. The effects of thermomechanical treatments on the two variables namely the coefficient of thermal expansion and heat capacity, we can provide further information for better understanding of the phenomena responsible for the thermodynamic behavior of the alloy. The results showed the one hand, there is great similarity between the linear coefficient of thermal expansion and heat capacity, and secondly the effect of plastic deformation is evidenced by changes in the shape of the curves from the rough. Similarly the kinetics of precipitation of η phase is accelerated in the case of samples homogenized and homogenized + distorted and accompanied by a shift in the temperature range to lower temperatures than those recorded in the case of the material state Gross

No abstract