Stabilization of the crystal phase of inorganic/organic lead halide perovskites is critical for their high performance optoelectronic devices. However, due to the highly ionic nature of perovskite crystals, even phase stabilized polycrystalline perovskites can undergo undesirable phase transitions when exposed to a destabilizing environment.While various surface passivating agents have been developed to improve the device performance of perovskite solar cells, conventional deposition methods using a protic polar solvent, mainly isopropyl alcohol (IPA), results in a destabilization of the underlying perovskite layer and an undesirable degradation of device properties. We demonstrate the hidden role of IPA in surface treatments and develop a strategy in which the passivating agent is deposited without destabilizing the high quality perovskite underlayer. This strategy maximizes and stabilizes device performance by suppressing the formation of the perovskite d-phase and amorphous phase during surface treatment, which is observed using conventional methods. Our strategy also effectively passivates surface and grain boundary defects, minimizing non-radiative recombination sites, and preventing carrier quenching at the perovskite interface. This results in an opencircuit-voltage loss of only B340 mV, a champion device with a power conversion efficiency of 23.4% from a reverse current-voltage scan, a device with a record certified stabilized PCE of 22.6%, and enhanced operational stability. In addition, our perovskite solar cell exhibits an electroluminescence external quantum efficiency up to 8.9%. Fig. 4 (a) 3D/LP PSC devices with efficiencies measured at MIT and at Newport. (b) Asymptotical measurement on stabilized open-circuit-voltage (V OC,S ). (c) Stabilization of current density. (d) Stabilized J-V curve extracted from (b and c) with stabilized power conversion efficiency (PCE S ) of 22.6%.

Lead chalcogenide colloidal nanocrystals (NCs) are promising materials for solution processable optoelectronics. However, there is little agreement on the identity and character of PbS NC emission for different degrees of quantum confinement-a critical parameter for realizing applications for these nanocrystals. In this work, we combine ensemble and single NC spectroscopies to interrogate preparations of lead sulfide NCs. We use solution photon correlation Fourier spectroscopy (S-PCFS) to measure the average single NC linewidth of near-infrared-emitting PbS quantum dots and find it to be dominated by homogeneous broadening. We further characterize PbS NCs using temperature-dependent linear and time-resolved emission spectroscopy which demonstrate that a kinetically accessed defect state dominates room temperature emission of highly confined emitting NCs. These experiments, taken together, demonstrate that the linewidth and Stokes shift of PbS NCs are the result of emission from two states: a thermally accessed defect-with an energetically pinned charge carrier-and an inhomogeneously broadened band-edge state.

No abstract

Traditionally, PbS/CdS quantum dots (QDs) have been synthesized via a cation exchange method, making fine control over shell growth challenging. We show here that colloidal atomic layer deposition (c-ALD) allows for the sequential growth of single monolayers of the shell, thus creating a 'true' CdS shell on PbS QDs.