No abstract

The ability of bone charcoal to remove Cr(III) from aqueous solutions by adsorption has been investigated. The adsorbent used was first characterised and then the adsorption was studied as a function of time and amount of charcoal. Tests were carried out with synthetic solutions whose Cr concentrations (500 mg L(-1)) were similar to those found in some effluents of Moroccan tannery industries. Cr removal efficiencies higher than 90% were obtained at pH 3.5 using 3 g of bone charcoal and a stirring time of about 30 min. Results of Cr removal by all sieved fractions of bone charcoal had shown the same interesting capabilities for Cr(III) retention. The cross interference with other elements was also investigated. Pre-treatment of bone charcoal by nitric acid led to an increase in its specific surface area but induced a drastic reduction in its Cr elimination abilities. Adsorption tests were also carried out using calcinated bone charcoal. The results obtained showed a similar percentage of Cr retention to those found with untreated bone charcoal. On the other hand, a double treatment of bone charcoal with HCl and NaOH provided an enhancement of Cr(III) retention. The role played by the mineral fraction of the solid phase of bone was thus evidenced.