The WEST experiment is currently operating with tungsten plasmafacing components and testing ITER-like divertor monoblocks. In order to support WEST experiments interpretation, numerical analyses were carried out. Starting from WEST experimental data, realistic background plasma conditions were reproduced through SolEdge-EIRENE and used as input for ERO2.0 simulations to investigate tungsten migration. Tungsten contamination due to the different plasmafacing components was modelled under different plasma conditions, highlighting a non-negligible contribution of tungsten coming from the tokamak main chamber. Tungsten penetration factor was computed and used as an indication for tungsten screening by the background plasma at the different tokamak plasma-facing components. Simulations showed the main chamber components to be very weakly screened. Light impurities charge was showed to influence not only tungsten sputtering, but also its probability to enter the confined plasma. Simulations results indicated that even when the tungsten source is not heavily influenced by self-sputtering, contamination of the confined plasma can be strongly impacted by it in low density 1 background plasma conditions. Finally, a one-to-one comparison between tungsten visible spectroscopy at the lower divertor from experimental data and from synthetic diagnostics was performed, showing that it is possible to reproduce a realistic lower divertor signal following experimental evidence on light impurities asymmetry between the targets.

No abstract

Transport codes are frequently used for describing fusion plasmas with the aim to prepare tokamak operations. Considering novel codes, such as SolEdge3X-HDG, synthetic diagnostics are a common technique used to validate new models and confront them with experimental data. The purpose of this study is to develop a set of synthetic diagnostics, starting from bolometer and visible cameras for the WEST tokamak, in order to compare the code results with the experimental data. This research is done in the framework of Raysect and Cherab Python libraries. This allows us to process various synthetic diagnostics in the same fashion in terms of 3D ray tracing with volume emitters developed specifically for fusion plasmas. We were able to implement the WEST tokamak model and the design of bolometer and visible cameras. Synthetic signals, based on full-discharge WEST plasma simulation, were used for to compare the SolEdge3X-HDG output plasma with experimental data. The study also considers the optical properties of the plasma-facing components (PFCs) and their influence on the performance of diagnostics. The paper shows a unified approach to synthetic diagnostic design, which will be further extended to cover the remaining diagnostics on the WEST tokamak.