A method for the determination of pesticide residues in water and sediment was developed using the QuEChERS method followed by gas chromatography – mass spectrometry. The method was validated in terms of accuracy, specificity, linearity, detection and quantification limits. The recovery percentages obtained for the pesticides in water at different concentrations ranged from 63 to 116%, with relative standard deviations below 12%. The corresponding results from the sediment ranged from 48 to 115% with relative standard deviations below 16%. The limits of detection for the pesticides in water and sediment were below 0.003 mg L−1 and 0.02 mg kg−1, respectively.

No presente trabalho uma metodologia analítica é descrita para determinar a presença de multiresiduos de pesticidas utilizados na cultura da cana de açúcar (tebuthiuron, hexazinona, diuron, 2,4-D e ametrina), em fontes de água de abastecimento. Os analitos foram isolados da matriz água, através das seguintes técnicas: extração liquido-liquido (LLE), utilizando diclorometano como solvente; extração em fase sólida (SPE), utilizando C18 como suporte sólido e acetonitrila como solvente para condicionamento da fase e eluição dos analitos; e extração com fluido supercrítico (SFE), utilizando C18 como suporte sólido e CO 2 no estado supercrítico como solvente de extração. Análise cromatográfica foi feita por cromatografia liquida de alta eficiência (HPLC) com detector ultravioleta, utilizando acetonitrila/água como fase móvel. Dentre as três técnicas de extração avaliadas, os melhores resultados foram obtidos com extração liquido-liquido e extração em fase sólida.In the present work an analytical methodology is described to determine the presence of multiresidues of selected pesticides used in sugar-cane cultures (tebuthiuron, hexazinone, diuron, 2,4-D and ametrine), in source of drinking water. The analytes were isolated from the water matrix through the following techniques: liquid-liquid extraction (LLE) using dichloromethane as solvent; solid phase extraction (SPE) using C 18 as solid support and acetonitrile as solvent to condition the solid phase and elution of the analytes; and supercritical fluid extraction (SFE) using C18 as solid support and CO 2 in supercritical state as extractant solvent. The chromatographic analysis was done by high performance liquid chromatography (HPLC) with an ultraviolet detector and using acetonitrile/ water as mobile phase. Among the three evaluated extraction techniques, the best results were obtained with both liquid-liquid extraction and solid phase extraction.

No abstract

No abstract

In the present work experimental conditions were optimized for the analysis of organochlorine traces in water matrix using solid-phase microextraction (SPME) followed by gas chromatography with mass selective detector. The parameters including time of exposure of the fiber in the aqueous sample, fiber type, agitation speed, pH, ionic forces, temperature of adsorption, and time of desorption were evaluated. The best conditions to analyze organochlorine were obtained by using higher than room temperature, agitation of the sample, extraction time of 40 min, and polyacrylate fiber.