ITER is an experimental nuclear reactor, aiming to demonstrate the feasibility of nuclear fusion realization in order to use it as a new source of energy. ITER is a plasma device (tokamak type) which will be equipped with a set of plasma diagnostic tools to satisfy three key requirements: machine protection, plasma control and physics studies by measuring about 100 different parameters. ITER diagnostic equipment is integrated in several ports at upper, equatorial and divertor levels as well internally in many vacuum vessel locations. The Diagnostic Systems will be procured from ITER Members (Japan, Russia, India, United States, Japan, Korea and European Union) mainly with the supporting structures in the ports. The various diagnostics will be challenged by high nuclear radiation and electromagnetic fields as well by severe environmental conditions (ultra high vacuum, high thermal loads). Several neutron systems with different sensitivities are foreseen to measure ITER expected neutron emission from 10 14 up to almost 10 21 n/s. The measurement of total neutron emissivity is performed by means of Neutron Flux Monitors (NFM) installed in diagnostic ports and by Divertor Neutron Flux Monitors (DNFM) plus MicroFission Chambers (MFC) located inside the vacuum vessel. The neutron emission profile is measured with radial and vertical neutron cameras. Spectroscopy is accomplished with spectrometers looking particularly at 2.5 and 14 MeV neutron energy. Neutron Activation System (NAS), with irradiation ends inside the vacuum vessel, provide neutron yield data. A calibration strategy of the neutron diagnostics has been developed foreseeing in situ and cross calibration campaigns. An overview of ITER neutron diagnostic systems and of the associated challenging engineering and integration issues will be reported.

The ITER Tokamak Complex is the civil structure that will host the ITER Tokamak and the largest part of the associated systems. The dimensions are 120 m  ×  80 m  ×  60 m, built mostly of concrete, with over one thousand penetrations. During ITER operation, a radiation field will spread throughout the complex from diverse radiation sources. It must be characterized to check the compliance with the limits for electronics allocation and human intervention. However, the production of radiation maps in the ITER Tokamak Complex is a task of paramount sophistication due to challenges to adequately model in MCNP the radiation sources involved. In this work, two important methodological upgrades are presented. First, a new MCNP model of the Tokamak Complex, conceived to be computationally stable while capturing a conservative representation of the baseline. Second, a novel approach to model the plasma source, called a mosaic source, allows an unprecedented degree of realism and accuracy in terms of capturing the port specificities. Both represent a step change in the capacity to produce ITER radiation maps with increased reliability, augmenting previous versions. Examples of partial radiation maps are provided considering both methodological upgrades.

No abstract

No abstract

No abstract