No abstract

The goal of this paper is to present a comparative analysis of two types of winding arrangements for a three-phase 12/8 switched reluctance motor (SRM), where short- and fully-pitched winding arrangements under unipolar operation are considered. From the analytical results, the short-pitched winding has the best torque per copper weight ratio. The core loss based on counting the number of flux reversals in the stator yoke for each winding arrangement is also proposed and mentioned. To reduce the magnetic flux reversals in the stator core, changing the direction of the magnetic flux path by modifying the winding polarities of the short-pitched winding could reduce 10–13% of core loss compared to the conventional winding. A 1 kW, 12/8 SRM prototype for the ventilation fan application is constructed and tested in order to verify the design consideration of winding configuration. At the rated condition, a maximum efficiency around 82.5% could be achieved.

In this paper an estimation method of the initial rotor position at a stand still condition for switched reluctance motor (SRM) drives is proposed. In the SRM, a rotor shaft is connected to an incremental encoder, thus, only an initial position should be detected to realize smooth start up operation. The proposed method is injecting voltage pulses to all windings and detecting the current and estimating the position based on a simple relation between inductance profile and phase current. With an accurate estimated rotor position, the motor can start smoothly under heavy load. The proposed method is implemented in a 6‐stator‐pole and 4‐rotor‐pole, 1.5 kW switched reluctance motor installed in an electric vehicle. © 2011 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.

In this paper, the implementation of a switched reluctance motor (SRM) and drive system for the propulsion system of a two-seat electric motorcycle is described. The overall design focuses on the required vehicle speed, acceleration, driving distance, and overall system cost, as well as reliability. The performance of the three-phase 6/4 pole (six-stator pole and four-rotor pole) and four-phase 8/6 pole (eight-stator pole and six-rotor pole) are investigated and compared by static performance analysis and dynamic performance analysis. Their performance is further investigated by finite element analysis. The indirect torque controller in a drive system for optimal torque and efficiency operation is also mentioned. A methodology for rotor position detection and its hardware implementation are also proposed. The designed 3.5 kW three-phase 6/4 pole SRM and its drive system were constructed and tested on the test bench. A maximum efficiency of about 82% could be achieved for the SRM and drive system. It was also installed on a 120-cc electric motorcycle, and the vehicle’s performance was also validated by on-road and dynamometer testing. The maximum vehicle speed reached was 82 km/h, and a cruising distance of about 98 km at a constant speed of 40 km/h was measured.