The demand for environmentally friendly and sustainable materials for nonstructural and structural applications grows by the day. Polymeric composites reinforced with fillers and fibres are considered to have increased strength and desirable wear resistance. Abrasive wear of industrial and agricultural based components are currently one of the most serious issue. Therefore, the current research reports on the influence of Halloysite-Nanotubes (HNTs) loading on the three body abrasive behavior of bidirectional silk fibre (SF) and basalt fibre (BF) reinforced epoxy (Ep) composites. Rubber wheel with dry sand abrasion testing in accordance with ASTM G65-16e1 was performed with four control parameters such as filler content, load, abrading distance and silica sand size. The tests were planned as per orthogonal array of Taguchi (L27). Significant impact of control factors were identified using ANOVA (Analysis of variance). The results demonstrated that adding HNTs to SF-BF/Ep nanocomposites significantly improved the wear resistance and the combination of A2, B1, C3 and D1 control factors yields the lower specific wear rate (SWR). Findings exhibit that the load and abrading distance were the most significant parameters affecting the abrasive wear of SF-BF/Ep nanocomposites followed by filler content and silica sand size. Microstructural features were observed via scanning-electronmicroscopy (SEM).

No abstract