The main idea behind this work was demonstrated in a form of a new thermoelectrochromic sensor on a flexible substrate using graphene as an electrically reconfigurable thermal medium (TEChrom6). Our approach relies on electromodulation of thermal properties of graphene on poly(ethylene terephthalate) (PET) via mechanical destruction of a graphene layer. Graphene applied in this work was obtained by chemical vapor deposition (CVD) technique on copper substrate and characterized by Raman and scanning tunneling spectroscopy. Electrical parameters of graphene were evaluated by the van der Pauw method on the transferred graphene layers onto SiO 2 substrates by electrochemical delamination method. Two configurations of architecture of sensors, without and with the thermochromic layer, were investigated, taking into account the increase of voltage from 0 to 50 V and were observed by thermographic camera to define heat energy. Current-voltage characteristics obtained for the sensor with damaged graphene layer are linear, and the resistivity is independent from the current applied. The device investigated under 1000 W/m 2 exhibited rise of resistivity along with increased temperature. Flexible thermoelectrochromic device with graphene presented here can be widely used as a sensor for both the military and civil monitoring.

No abstract

Many armies around the world showed an increasing interest for the technology of renewable energy sources for military applications. However, to profit fully from solar or wind energy, an energy storage system is needed. In this article, we present an energy storage system based on acid-lead batteries as a component of a modular generation-storage as a model of military “smart camp”. We proposed a technical approach to study four different types of batteries: DEEP CYCLE, AGM, WET and VRLA in laboratory and real conditions typical for military equipment. It was observed that the best performance was observed for AGM battery in terms of the highest cold cracking amperage equal to 1205 A combined with the most compact construction and resistance to varying thermal conditions from −25 °C, 25 °C and 50 °C. Additionally, a 12-month long-term testing in real conditions revealed that AGM and VRLA showed decrease in capacity value maintaining only approx. 80% of initial value.

No abstract