No abstract

The essence of any Foundry is its furnace. The operation of the furnace legally involves the process of melting metal by hand is highly dependent on human performance as well ability. With increasing demand and improved technology, this is a common approach it is quickly replaced by temperature-controlled libraries. Basic the effectiveness of such a control to compare the temperature of the metal with the set melting temperature and send the corresponding output to the heat or heat feature. The type of temperature and the furnace customize the type of controller used. While such a control system exists, other safety and fuel management controls plans are the essentials of a modern day oven. This paper is intended in the construction of such a gas burner control system. Gas exploded Furnace Control System includes an active Burner Management System a large part of the melting process. The Control system is built with emphasis on Flame Feedback method, which was analyzed in detail. The control system is actually a temperature control system which includes sensor inputs including thermocouple and flame rod, and effects such as large gas valve, heat rod and blower fan motor. Thus this system is aimed at proper burner management that facilitates the furnace operation and ensures safety of not only the furnace-burner system but the plant in general.