The duplication characteristics of perpendicular magnetic media were analyzed by using metal evaporated (ME) tape as a slave medium. In the case of bit printing (BP), the best duplication characteristic was obtained at a duplication field of 4 kOe, about 2 times higher than the coercivity of the ME tape. On the other hand, in the case of edge printing (EP), duplication characteristics were saturated when the duplication field was more than 3kOe. When the duplication field was strengthened, in the case of BP, the peak position shifted towards the outside of the magnetic layer of the master, whereas, in EP, the peak position shifted towards the center of the magnetic layer. The calculated MFM output waveform obtained by using computer simulation almost coincided with the experimental result, and the cause of the sub-peak could thus be explained. It was concluded that EP has better duplication characteristics than BP.
The influence of the inclination angle of the master pattern on the patterns on perpendicular magnetic recording media characteristics are only 10 percent lower than when the angle is pattern on the printing characteristics is component of the recording field to magnetization recording field decreases markedly as the inclination angle of the master pattern increases, edge printing phase servo patterns on slave media.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.