Copper oxide nanoparticles (CuO NPs) were synthesized by two methods. The first was chemical method by using copper nitrate Cu (NO3)2 and NaOH, while the second was green method by using Eucalyptus camaldulensis leaves extract and Cu (NO3)2. These methods easily give a large scale production of CuO nanoparticles. X-ray diffraction pattern (XRD) reveals single phase monoclinic structure. The average crystalline size of CuO NPs was measured and used by Scherrer equation which found 44.06nm from chemical method, while the average crystalline size was found from green method was 27.2nm. The morphology analysis using atomic force microscopy showed that the grain size for CuO NPs was synthesized by chemical and green methods were 77.70 and 89.24 nm, respectively. The effectiveness of copper oxide nanoparticles on bacteria was measured for both gram positive, negative and fungi, copper oxide minutes showed excellent efficacy on biofilm formation.

This research evaluates the optical properties of an inhomogeneous and non-paraxial system using a solar ball lens (SBL) as a new thermal solar concentrated collector. This evaluation is based on detecting a diacaustic curve in a straightforward and accurate manner, with the diagnostic relying on image processing as a computational tool using the MATLAB program rather than a complicated numerical analytic procedure. The circle of least confusion (CLC) of the (SBL), (Fluorinated ethylene propylene (FEP) polymer – water core), was calculated. Furthermore, the study evaluated the maximum geometrical concentration ratio (G C) of refracted solar radiation that can be captured by a receiver of the (SBL). Without energy losses due to spherical aberration, the (G C) ratio was (14.10) at (h/r) ratio, circular aperture radius to ball radius, around (0.6). The investigation also revealed an aplanatic point for preventing the development of optical envelope inside the solar ball lens at (h/r) equal to 0.8638, as well as a maximum (h/r) value of 0.7351 for collecting solar radiation.

The hot aqueous extract of E. camaldensis leaves as a degradable agent and copper nitrate as a copper source with cold plasma was used in this work to present an easy and green technique for copper oxide nanoparticles (CuO NPs) synthesis. UV-Vis absorption spectroscopy, X-ray diffraction (XRD), Atomic Force Microscopes (AFM), and Scanning Electron Microscopes (SEM) were all used to determine the production of copper oxide nanoparticles (SEM). The energy gap was 4.9[Formula: see text]eV, and the average crystalline size of CuO NPs evaluated using the Scherrer equation was 15.06[Formula: see text]nm, according to the X-ray diffraction pattern (XRD). CuO NPs had a grain size of 70.63 nanometers, according to AFM morphology study. Finally, the effect of copper oxide nanoparticles on Gram-positive and Gram-negative bacteria, as well as fungi, was studied.