In this paper, the influences of the graphite precursor and the oxidation method on the resulting reduced graphene oxide (especially its composition and morphology) are shown. Three types of graphite were used to prepare samples for analysis, and each of the precursors was oxidized by two different methods (all samples were reduced by the same method of thermal reduction). Each obtained graphite oxide and reduced graphene oxide was analysed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy (RS).

The paper presents the results of investigations on resistance structures based on graphite oxide (GRO) and graphene oxide (rGO). The subject matter of the investigations was thaw the sensitivity of the tested structures was affected by hydrogen, nitrogen dioxide and carbon dioxide. The experiments were performed at a temperature range from 30 °C to 150 °C in two carrier gases: nitrogen and synthetic air. The measurements were also aimed at characterization of the graphite oxide and graphene oxide. In our measurements we used (among others) techniques such as: Atomic Force Microscopy (AFM); Scanning Electron Microscopy (SEM); Raman Spectroscopy (RS); Fourier Transform Infrared Spectroscopy (FT-IR) and X-ray Photoelectron Microscopy (XPS). The data resulting from the characterizations of graphite oxide and graphene oxide have made it possible to interpret the obtained results from the point of view of physicochemical changes occurring in these structures.

Abstract. The paper presents a resistance structures with sensor layers based on nanostructures elaborated on the base of TiO2 and ZnO. The structures were tested concerning their sensitivities to the effects of nitrogen dioxide in the atmosphere of synthetic air. The TiO2 and ZnO nanostructures played the role of sensor layers. Investigations have proved that the elaborated resistance structures with TiO2 and ZnO layers are sensitive to the presence of NO2 in the atmosphere of synthetic air. The resistance of the structure amounted to about 20Ω in the case of ZnO structures and to about 200Ω in the case of TiO2 structures. The investigations confirmed that resistance structures with ZnO and TiO2, exposed to the effect of nitrogen dioxide in the atmosphere of synthetic air changes their resistances relatively fast. This indicates that such structures might be practically applied in sensors of nitrogen dioxide ensuring a short time of response.

In the paper the results of investigations are presented concerning the inuence of humidity of air on the resistance of a gas sensor structure with a graphene layer. The aects of nitrogen dioxide and humidity action on graphene were studied. We indicated that humidity might play an important role in determining the gas sensing properties of the graphene layer. In the paper it has been shown that in the case of a nitrogen oxide sensor, the reaction of NO2 with water vapour can generate permanent defects in graphene.

No abstract