The objectives of the present work were to evaluate the chemical compatibility between coir (Cocos nuciferaL.) and cement and to study treatment methods to improve this compatibility. In the inhibition test, cement hydration temperature evolution was measured in the absence and presence of untreated and treated coir fibres (cold water, hot water and NaOH), besides the addition of 4% of CaCl2. The chemical characterization of untreated and treated coir fibres was done by determining the content of extractives, lignin, and holocellulose. The inhibition test graded the untreated fibre as “extreme inhibition,” ratifying the need to provide it a treatment. Treatments done on coir fibres affected positively the compatibility between cement and fibre, reducing the inhibition. The treatments reduced the lignin coir fibres’ and extractives proportion, whose variation was significantly correlated with the reduction of the inhibitory index. These results indicate a possibility for future incorporation of these fibres into the production of mineral composites.

The purpose of this study was to evaluate the wettability and surface roughness of 11 Amazonian hardwoods. Surface roughness was evaluated by a profilometer, while wettability was measured by a goniometer. Distillated water and phenol-formaldehyde were employed to study wood wettability. A 10-μL drop was placed on the wood surface and the contact angle was measured every 2 seconds for 120 seconds. The Virola michelii and Trattinnickia burserifolia wood specimens analyzed presented different roughness values according to the surface evaluated, radial or tangential. Regarding wettability, Virola michelii wood showed the lowest water contact angle on the tangential surface, while the radial surface presented better wettability for phenol-formaldehyde. The wettability of the species studied was not clearly affected by surface roughness, which depends on wood density.

No abstract