Elastomeric polyurethanes with tunable biodegradation properties and suitable for numerous biomedical applications were synthesized via reaction of epoxy-terminated polyurethanes (EUPs) with 1,6-hexamethylenediamine as curing agent. The EUPs themselves were prepared from glycidol and isocyanate-terminated polyurethanes made from poly(ε-caprolactone) (PCL) or poly(ethylene glycol) (PEG) and 1,6-hexamethylene diisocyanate. All the polymers were characterized by conventional methods, and their physical, mechanical, thermal, and degradation properties were studied. The results showed that the degradation rate and mechanical properties of the final products can be controlled by the amount of PEG or PCL present in the EUP. Increasing the PEG content causes an increase of hydrolytic degradation rate, and increasing the PCL content improves the mechanical properties of the final products. Evaluation of cytotoxcicity showed nontoxic behavior of the prepared samples, but the cytocompatibility of these polymers needs to be improved.

Biodegradable polyurethane elastomers with the potential for applications in medical implants were synthesized from the reaction of epoxy‐terminated polyurethane prepolymers (EUPs) with 1,6‐hexamethylenediamine as a curing agent. EUPs were themselves prepared from the reaction of glycidol and isocyanate‐terminated polyurethanes made from different molecular weights of poly(ε‐caprolactone) (CAPA) and 1,6‐hexamethylene diisocyanate. All materials were characterized by spectroscopic methods. The curing conditions were optimized by gel content measurements. The curing kinetic and kinetic parameters were determined from differential scanning calorimetry measurements. The effects of changing the crosslink density and crystallinity of elastomers via the alteration of the CAPA polyol molecular weight on the physical, mechanical, and degradation properties of the final elastomeric polymers were examined fully. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2985‐2996, 2005

No abstract

No abstract

Summary: A new series of thermoplastic poly(urethane‐imide)s (TPUI1‐4) containing hydroxyl groups in the backbone was synthesized from the reaction of epoxy‐terminated polyurethane prepolymers (EPU1‐4) and an imide containing diacid (DIDA) chain extender under optimized reaction conditions. EPU1‐4 was prepared through end‐functionalization of NCO‐terminated polyurethanes based on polyester polyol (CAPA) and hexamethylene diisocyanate with glycidol. A blocked isocyanate (BIC) was made from the reaction of trimethylol propane (TMP), toluene diisocyanate (TDI) and N‐methylaniline (NMA). Polymer networks were prepared from the reaction of librated isocyanate groups of BIC with hydroxyl groups of TPUIs. The starting materials and polymers were characterized by conventional spectroscopic methods and the physical, thermal and electrical properties of crosslinked networks were studied. Investigation of the recorded properties for these samples showed considerable improvement in thermal and electrical properties in comparison to common polyurethanes.