Here, environmental dust cleaning from an inclined hydrophobic surface by rolling liquid droplets has been studied and the influence of fluid droplets on the dust removal rate has been examined.

Water droplet cleaning of a dusty hydrophobic surface is examined. Environmental dust are used in the experiments and cloaking velocity of a dust layer by a droplet fluid is measured and hemi-wicking conditions for the dust layer are analyzed adopting the pores media wick structure approach. A droplet motion on dusty and inclined hydrophobic surface is analyzed using a high speed digital imaging system. Influences of dust layer thickness, droplet volume, and surface inclination angle on the mechanisms of dust removal by a rolling droplet are evaluated. The findings revealed that dust cloaking velocity decreases exponentially with time. The droplet fluid can cloak the dust layer during its transition on the dusty surface. The transition period of droplet wetted length on the dusty surface remains longer than the cloaking time of the dust layer by the droplet fluid. Translational velocity of rolling droplet is affected by the dust layer thickness, which becomes apparent for small volume droplets. Small volume droplet (20 µL) terminates on the thick dust layer (150 µm) at low surface inclination angle (1°). The quantity of dust picked up by the rolling droplet increases as the surface inclination angle increases. The amount of dust residues remaining on the rolling droplet path is relatively larger for the thick dust layer (150 µm) as compared to its counterpart of thin dust layer (50 µm).

Impacting droplet on a hydrophobic surface is investigated and droplet size effect on impacting properties is examined. Liquid pressure variation inside droplet is numerically simulated in the impacting and rebounding periods. Droplet motion on impacted hydrophobic surface is monitored using a high-speed recording system. We showed that predictions and high-speed data for droplet shape and geometric features appear to be almost identical in the spreading and retraction of the droplet on sample surface. Increased volume of droplet gives rise to the peak pressure enhancement in droplet liquid during impact. The maximum droplet height remains larger for large volume droplets in both spreading and retraction cycles. Increasing size of droplet enlarges the wetting diameter on the impacted surface during droplet deformation on sample surfaces. The rate of peak velocity of the spreading surface of the droplet is faster for small droplets as compared to that corresponding to large droplets. The ratio of spreading period over the retraction period of the droplet becomes small for droplets with small size.