Abstract— This research aimed to identify the effect of the substitution of super red dragon fruit peel (Hylocereus costaricensis) towards the physical and organoleptic characteristic of low-fat ice cream, todeterminethe best formulationof the Substitution of super red dragon fruit peel (Hylocereus costaricensis)intolow-fat ice creamand to determine whether the best formulation of low-fat ice cream with the substitution of super red dragon fruit peel (Hylocereus costaricensis)is as acceptable as commercial ice cream. This research was designed using a completely randomized design (CRD) with the substitutionof super red dragon fruit peel (0, 6, 8, 10, and 12% w/w) as the treatments. The parameters of overrun, melting time, viscosity, colour (L*, a* and b* values), and organoleptic evaluation including hedonic quality of colour and texture and overall acceptance were analyzed. The best treatment of organoleptic evaluation then was analyzed by paired comparison evaluation method with commercial ice cream. The result showed that the substitutionof super red dragon fruit peel was significantly different (P<0,01) on overrun, melting time, viscosity, colour (L*, a* and b* values), hedonic quality of colour and texture, and overall acceptance. The substitutionof 8% super red dragon fruit peel was found to be the best treatment based on organoleptic evaluation with overrun of 38,40%, melting time of 16,11 minutes, viscosity of 551,03 cP, colour; L* 63,80, a* 12,78, b* 19,25, hedonic quality of colour 3,10 (pink), texture 4,15 (smooth, non-snowy) and overall acceptance 4,45 (like moderately). The best formulation of low-fat ice cream with the substitution of 8% super red dragon fruit peel was not significantly different on the paired comparison evaluation with the score of 0,20 (Similar). Keywords— Ice cream; Low-fat; Peel; Super Red Dragon Fruit.
This study aims to determine the optimal temperature for drying kernel flour from tea seeds which will be used as raw material in the production of tea seed oil (TSO) by maceration method using n-hexane solvent. The study used a completely randomized design with 6 treatments for drying temperatures, namely: 60, 70, 80, 90, 100, and 110oC. The results showed that the optimal temperature for drying kernel flour from tea seeds was 80oC with a drying time of 3.5 hours. At the optimum temperature obtained TSO yield of 16.12% with free fatty acid content of 0.40%, iodine number 30.16 g I2/100 g of material, peroxide number 0.16 meq KOH /100 g, saponification number 144.55 mg KOH/g TSO, specific gravity 0.94 g/ml, refractive index 1.67, and melting point 2.0oC.
Tujuan dari penelitian ini adalah untuk menentukan keefektifan penggunaan Shredder Machine dan Empty Fruit Bunch Press Machinedalam mengurangi kehilangan minyak dari tandan minyak sawit kosong, serta analisis aspek ekonomi. Penelitian ini menggunakan Rancangan Acak Kelompok (RAK) dengan dua perlakuan dalam lima belas kelompok sebagai ulangan. Parameter yang diamati adalah kehilangan minyak, serta efisiensi dan efektivitas mesin, biaya recovery, dan aspek ekonomi (biaya tetap dan biaya variabel). Hasil penelitian menunjukkan, bahwa efisiensi sebesar 66,82% dan efektivitas penggunaan mesin sebesar 91,59%; dengan asumsi 50% dari tandan kosong yang diproses dapat di-recovery minyak senilai Rp 27.215.790 per hari atau Rp 7.321.047.505 per tahun. Dengan biaya tetap sebesar Rp 629.366.250 dan biaya tidak tetap sebesar Rp 132.738.534, diperoleh keuntungan dari penggunaan Shredder Machine dan Empty Fruit Bunch Press Machinesebesar Rp 6.558.942.721 per tahun.
Peningkatan kesadaran akan dampak lingkungan yang terkait dengan produksi dan penggunaan piring plastik memunculkan gagasan untuk memproduksi piring ramah lingkungan dari bahan alami, seperti pelepah pinang (Areca catechu L.). Untuk membuat piring dari pelepah pinang dibutuhkan alat pencetak. Penelitian ini bertujuan untuk meningkatkan kualitas alat pencetak dengan menggunakan Metode QFD. Metode ini terdiri dari empat tahapan, yaitu: (1) Perencanaan Produk, (2) Perencanaan Teknik, (3) Perencanaan Proses, dan (4) Perencanaan Produksi. Berdasarkan hasil analisis kebutuhan pelanggan dihasilkan daftar lima prioritas kebutuhan pelanggan, yaitu: (1) tidak melelahkan, (2) tidak berkarat, (3) rangka kompak, kokoh dan stabil, (4) ergonomis, dan (5) cetakan yang dapat diganti. Terdapat lima karakteristik kualitas untuk memenuhi lima kebutuhan pelanggan, yaitu: (1) pengepres otomatis, (2) sasis ergonomis, (3) bahan cetakan tidak berkarat, (4) sasis kaku dan kuat, dan (5) desain minimalis. Oleh karena itu, dapat disimpulkan bahwa dengan menggunakan keempat fase Metode QFD alat pencetak piring dari pelepah pinang yang memenuhi kebutuhan pelanggan telah berhasil dikembangkan.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2025 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.