In this paper we propose a method to improve the accuracy of trajectory optimization for dynamic robots with intermittent contact by using orthogonal collocation. Until recently, most trajectory optimization methods for systems with contacts employ mode-scheduling, which requires an a priori knowledge of the contact order and thus cannot produce complex or non-intuitive behaviors. Contact-implicit trajectory optimization methods offer a solution to this by allowing the optimization to make or break contacts as needed, but thus far have suffered from poor accuracy. Here, we combine methods from direct collocation using higher order orthogonal polynomials with contact-implicit optimization to generate trajectories with significantly improved accuracy. The key insight is to increase the order of the polynomial representation while maintaining the assumption that impact occurs over the duration of one finite element.

We propose a new strategy to synthesize heat exchanger networks with detailed designs of individual heat exchangers. The proposed strategy uses a multistep approach by first obtaining a heat exchanger network topology through solving a modified version of the mixed integer nonlinear programming (MINLP) stage‐wise superstructure of Yee and Grossmann, which includes a smoothed LMTD approximation and pressure drops. In a second nonlinear programming (NLP) suboptimization step, we allow for nonisothermal mixing to solve problems with or without exchanger bypasses. The selected heat exchangers along with the mass and energy balances obtained are then used to design the network with detailed exchanger designs through solving a sequence of NLPs for individual heat exchanger designs. The NLPs are based on the detailed discretized optimization models of Kazi et al., which solve quickly and reliably to obtain heat exchangers based on rigorous, first‐principles derived coupled differential equations. These models solve a differential algebraic equation system and do not rely on usual assumptions associated with other heuristic‐based exchanger design methods, such as log mean temperature difference and FT correction factors. These detailed exchanger designs are then used to update the network optimization model through sets of correction factors on heat exchanger area, number of shells, heat transfer coefficients, and pressure drops of each exchanger design, in a method based on that of Short et al. The method solves reliably, guaranteeing feasible exchangers for every potential network generated by the shortcut models, through validation with rigorous heat exchanger models at every iteration. In addition, the method does not increase the nonlinearity of the MINLP model, nor does it require any manual intervention or initialization from the user. Three examples are solved and the results are compared to those obtained in the literature.

A new method for the detailed design of shell and tube heat exchangers is presented through the formulation of coupled differential heat equations, along with algebraic equations for design variables. Heat exchanger design components (tube passes, baffles, and shells) are used to discretize the differential equations and are solved simultaneously with the algebraic design equations. The coupled differential algebraic equation (DAE) system is suitable for numerical optimization as it replaces the nonsmooth log mean temperature difference (LMTD) term. Discrete decisions regarding the number of shells, fluid allocation, tube sizes, and number of baffles are determined by solving an LMTD‐based method iteratively. The resulting heat exchanger topology is then used to discretize the detailed DAE model, which is solved as a nonlinear programming model to obtain the detailed exchanger design by minimizing an economic objective function through varying the tube length. The DAE model also provides the stream temperature profiles inside the exchanger simultaneously with the detailed design. It is observed that the DAE model results are almost equal to the LMTD‐based design model for one‐shell heat exchangers with constant stream properties but shows significant differences when streams properties are allowed to vary with temperature or the number of shells are increased. The accuracy of the solutions and the required computational costs show that the model is well suited for solving heat exchanger network synthesis problems combined with detailed exchanger designs, which is demonstrated in Part 2 of the paper.

No abstract

No abstract