In this paper, we describe the properties of Fabry-Perot fiber cavity formed by two fiber Bragg gratings in terms of the grating effective length. We show that the grating effective length is determined by the group delay of the grating, which depends on its diffraction efficiency and physical length. We present a simple analytical formula for calculation of the effective length of the uniform fiber Bragg grating and the frequency separation between consecutive resonances of a Fabry-Perot cavity. Experimental results on the cavity transmission spectra for different values of the gratings' reflectivity support the presented theory.

A: We report on benchmark tests of a 3 TW/50 fs, table-top laser system specifically developed for proton acceleration with an intrinsic pump rate up to 100 Hz. In two series of single-shot measurements differing in pulse energy and contrast the successful operation of the diode pumped laser is demonstrated. Protons have been accelerated up to 1.6 MeV in interactions of laser pulses focused on aluminium and mylar foils between 0.8 and 25 µm thickness. Their spectral distributions and maximum energies are consistent with former experiments under similar conditions. These results show the suitability of our system and provide a reference for studies of laser targets at high repetition rate and possible applications.

No abstract

No abstract

We report on the cutoff characteristics of a Ge-doped Y-shaped microstructured fiber in which the holes are filled with a liquid of refractive index higher than silica but lower than the Ge-doped core. It is found that the cutoff wavelength was very sensitive to temperature variations as a result of the refractive index changes of the liquid. The basic properties of such a fiber permit the fabrication of wideband tunable short-pass filters, as well as temperature sensors with high sensitivity. A temperature sensitivity of 25 nm/degrees C is reported.