Retinal implants restore a sense of vision, for a growing number of users worldwide. Nevertheless, visual acuities provided by the current generation of devices are low. The quantity of information transferable to the retina using existing implant technologies is limited, far below receptor cells' capabilities. Many agree that increasing the information density deliverable by a retinal prosthesis requires devices with stimulation electrodes that are both dense and numerous. This work describes a new generation of retinal prostheses capable of upscaling the information density conveyable to the retina. Centered on engineered diamond materials, the implant is very well tolerated and long‐term stable in the eye's unique physiological environment and capable of delivering highly versatile stimulation waveforms – both key attributes in providing useful vision. Delivery of high‐density information, close to the retina with the flexibility to alter stimulation parameters in situ provides the best chance for success in providing high acuity prosthetic vision.

No abstract

High density electrodes are a new frontier for biomedical implants. Increasing the density and the number of electrodes used for the stimulation of retinal ganglion cells is one possible strategy for enhancing the quality of vision experienced by patients using retinal prostheses. The present work presents an integration strategy for a diamond based, high density, stimulating electrode array with a purpose built application specific integrated circuit (ASIC). The strategy is centered on flip-chip bonding of indium bumps to create high count and density vertical interconnects between the stimulator ASIC and an array of diamond neural stimulating electrodes. The use of polydimethylsiloxane (PDMS) housing prevents cross-contamination of the biocompatible diamond electrode with non-biocompatible materials, such as indium, used in the microfabrication process. Micro-imprint lithography allowed edge-to-edge micro-scale pattering of the indium bumps on non-coplanar substrates that have a form factor that can conform to body organs and thus are ideally suited for biomedical applications. Furthermore, micro-imprint lithography ensures the compatibility of lithography with the silicon ASIC and aluminum contact pads. Although this work focuses on 256 stimulating diamond electrode arrays with a pitch of 150 μm, the use of indium bump bonding technology and vertical interconnects facilitates implants with tens of thousands electrodes with a pitch as low as 10 μm, thus ensuring validity of the strategy for future high acuity retinal prostheses, and bionic implants in general.

This paper presents progress in the characterization and application of diamond penetrating electrode arrays for Epi-Retinal Prostheses. Electrical stimulation of degenerate retina has already been shown to restore partial vision for some blind patients, albeit at low spatial resolution. Higher resolution may be achievable by building arrays with electrodes that have greater areal density and closer proximity to target neurons. However, high standards of biocompatibility and hermeticity must be maintained, limiting the range of available materials of manufacture. Here, the design and histology of high density electrode arrays (approximately 100 electrodes/mm(2)) made from polycrystalline diamond and implanted into rat retinae are discussed. Results from initial steps in this process are reported.

Successful visual prostheses require stable, long-term attachment. Epiretinal prostheses, in particular, require attachment methods to fix the prosthesis onto the retina. The most common method is fixation with a retinal tack; however, tacks cause retinal trauma, and surgical proficiency is important to ensure optimal placement of the prosthesis near the macula. Accordingly, alternate attachment methods are required. In this study, we detail a novel method of magnetic attachment for an epiretinal prosthesis using two prostheses components positioned on opposing sides of the retina. The magnetic attachment technique was piloted in a feline animal model (chronic, nonrecovery implantation). We also detail a new method to reliably control the magnet coupling force using heat. It was found that the force exerted upon the tissue that separates the two components could be minimized as the measured force is proportionately smaller at the working distance. We thus detail, for the first time, a surgical method using customized magnets to position and affix an epiretinal prosthesis on the retina. The position of the epiretinal prosthesis is reliable, and its location on the retina is accurately controlled by the placement of a secondary magnet in the suprachoroidal location. The electrode position above the retina is less than 50 microns at the center of the device, although there were pressure points seen at the two edges due to curvature misalignment. The degree of retinal compression found in this study was unacceptably high; nevertheless, the normal structure of the retina remained intact under the electrodes.