Wood decay is an economically significant process, as it is one of the major causes of wood deterioration in buildings. In this study, the decay process of Scots pine (Pinus sylvestris) samples caused by cellar fungus (Coniophora puteana) was followed by nuclear magnetic resonance (NMR) spectroscopy and magnetic resonance imaging (MRI) methods. Altogether, 30 wood sample pieces were exposed to fungus for 10 weeks. Based on the decrease of the dry mass, the samples were categorized into three classes: decomposed (mass decrease 50–70%), slightly decomposed (10–50%), and nondecomposed (<10%). MRI made it possible to identify the active regions of fungus inside the wood samples based on the signal of free water brought by the fungus and arisen from the decomposition of wood carbohydrates. MRI implies that free water is not only created by the decay process, but fungal hyphae also transports a significant amount of water into the sample. Two-dimensional 1H T1-T2 relaxation correlation NMR measurements provided detailed information about the changes in the microstructure of wood due to fungal decomposition. Overall, this study paves the way for noninvasive NMR and MRI detection of fungal decay at early stages as well as the related structural changes.

This study aims to examine the characteristics of two solid lignin fractions isolated from wheat straw using alkaline and acidic deep eutectic solvents (DESs). The chemical properties and morphological characteristics of the two lignin fractions were evaluated by measuring their purity, elemental composition, molecular weight and particle size distributions, and microstructure. Their chemical structure was evaluated using DRIFT spectroscopy, GPC, TGA, 13 C NMR, 31 P NMR, and HSQC NMR. Our findings showed that the lignin isolated using alkaline DES was less pure and had smaller particle size, higher molecular weight, and thermal stability compared to the lignin isolated using acidic DES. Their lignin structure was also determined to be different due to varying selective fractures on the linkages of lignin. These results suggest that the DES treatments could selectively extract lignin from wheat straw with different yields, composition, morphology, and structure, which could then provide a theoretical basis for the selection of DESs for specially appointed lignin extraction.

Lignin modification opens the possibility of using it in polyol bio-based polymers, such as phenol-formaldehyde resins, polyurethanes, composites, and binders. Pine kraft lignin Indulin AT was partially depolymerized and the resulting products analyzed to determine their degree of valorization. Depolymerized lignin products were analyzed by GPC-SEC (molar mass), ∆ε-IDUS (phenolic hydroxyls), HACL (formaldehyde uptake), 13 C-NMR (hydroxyl and methoxyl groups), and 1 H-DOSY (molar mass distribution). The dominant parameter in lignin depolymerization by solvolysis was reaction temperature. According to the results, a higher reaction temperature decreases the average molar masses and PDI of lignin as well as the primary and secondary aliphatic hydroxyls, while simultaneously increasing the phenolic hydroxyls and formaldehyde uptake of lignin. Other variables (time, formic acid wt %, ethanol wt %, lignin load) had lesser effects. Partial depolymerization by solvolysis in mild conditions without catalyst is a viable valorization route for lignin, by which lignin properties can be significantly improved.