No abstract

This experimental study investigates the response of vertical and battered minipiles to two-way symmetrical low-frequency (0.1 Hz) cyclic lateral loading. Laboratory (1-g) tests were performed on scaled-down minipiles in very dense cohesionless soil, for batter angles of 0°, 25° and 45°. The cyclic loading is classified into two categories: multi-amplitude and long-term single amplitude, where force-controlled load was applied at a constant frequency. The minipiles were instrumented with optic fibres, and strain profiles were obtained at each loading stage, in both compression and tension stroke. The results are presented in terms of hysteresis loops, variation of normalised stiffness, minipile strain and bending moments under cyclic loading. In the multi-amplitude loading category, backbone curves show a stiffer force–displacement response in tension stroke than in compression stroke. For the single-amplitude category, the area of the hysteresis loop is largest for 45° battered minipiles with the lowest accumulated deformation. The normalised stiffness at the end of 50 cycles is highest for 25° minipiles with a value slightly greater than one. The strain profiles along the minipiles show stabilisation of measured strain before the number of cycle reaches 50, for all three battered conditions. A multi-surface hardening constitutive model is used to explain the effect of shearing and cyclic loading, with increasing loading amplitude on 25° battered minipiles. These test results are indicative of better performance capability of 25° battered minipiles, in terms of secant stiffness, compared to the vertical and 45° battered cases.

Battered minipile groups mimicking tree root networks have been gaining popularity as a footing solution for light structural applications in residential, commercial and infrastructure sectors, recently. Battered minipile group configurations are recently in the limelight due to advantages such as ease of installation and environmentally friendly nature. The lateral load resistance of battered minipile groups is investigated in this paper through a combination of physical and numerical modelling. Two-unconventional battered minipile groups with configurations representing the root network of trees with the capacity of engaging a larger volume of soil compared to conventional battered minipile group configurations are studied. A conventional battered minipile group is also included in the study to draw a direct comparison with the new minipile group configurations introduced in this paper. The conventional battered minipile group has two positively and two negatively 25° battered minipiles. The second type of group has one 25° perpendicularly battered minipile in the leading and trailing row each. Another unique orientation of the battered minipile group is also introduced in this study which has four diagonally outward 25° battered minipiles. The third type of minipile group with four diagonally outward battered minipiles offered the highest lateral resistance among the three groups. This better performance capability was attributed to the engagement of a larger volume of soil in resisting lateral load applied at the minipile head. Through this study, the industrial application of the unconventional minipile group configuration with better performance capability in terms of lateral load resistance can be advocated more confidently.

No abstract

The field of bio-inspired geotechnics has been growing in response to the demand for foundations that are sustainable and yet have improved load-bearing capacities. This study aims to address the gap in a specialised adaptation of root system architecture for designing resilient foundations. The lateral load behaviour of one such novel grouped battered minipile configuration is evaluated in this study based on full-scale field testing and numerical modelling to report the unknown increase of load capacity caused by shape modification. First, three single minipiles battered at 0° and 25° were subjected to static lateral loading in fine-grained soil. The strain profiles along the individual minipile shafts were obtained using optic fibre sensors. Consecutively, full-scale lateral load tests on two types of minipile groups were also performed; one group had a configuration of two 25° battered minipiles perpendicular to the direction of loading mimicking a tree-root system, and another conventional group had two positive and negative battered minipiles. A numerical model was developed to investigate the effect of pile spacing and obtain soil pressures, bending moments and axial forces of the battered minipile groups. Results show that increased bearing area and higher engagement of soil volume for the novel minipile group with two perpendicular battered minipiles were larger than the conventional minipile group; thus, the former offered higher lateral resistance. The deflection pattern, bending moment and p-y curves showed a shadowing effect in stiff clay for battered minipile groups at a pile head spacing of three times the minipile diameter.