No abstract

No abstract

Silica-capped Zinc Sulfide (ZnS) nanoparticles were synthesized for the use as stable and long-term antibacterial agents because silica is a very important component in food packaging applications for moisture absorption in tune with its property of biocompatibility and water solubility. The variation in morphological and optical properties of core-shell nanostructures was studied by changing the concentration of silica in a core-shell combination. The structural and morphological properties of silica-capped ZnS have been observed by powder X-ray diffraction (PXRD) and transmission electron microscopic (TEM) studies, respectively. Uncapped ZnS nanoparticles with particle size of 2-4 nm in a highly agglomerated state have been observed from TEM, which shows that they can be used only for short-term antibacterial action despite its excellent zone of inhibition (antibiotic sensitivity). However, ZnS/SiO 2 core-shell nanostructures are highly monodisperse in nature and the particle size increases up to 5-8 nm with increase in silica concentration. Fourier-transform infrared spectroscopy (FTIR) analysis confirms the formation of silica capping on the ZnS surface. The inhibition of defect-related emission by silica capping in energy-resolved photoluminescence studies also shows the formation of very stable ZnS nanoparticles. To study the antibacterial properties of the pure and silica-capped ZnS nanostructure the agar-well diffusion method was employed against both grampositive and gram-negative bacteria. The obtained results indicate that pure ZnS shows excellent antibacterial action but it can last only for few days. K E Y W O R D S

Investigations were carried out on aging of a HSLA-100 steel containing Cu as the major alloying element and Nb, Ti and V as microalloying elements. The aging process after varying amounts of cold deformation was followed by hardness measurements and microstructural changes were studied using light and electron microscopy. Presence of Ti activates the formation of (Nb, Ti)C precipitates and completely suppresses the precipitation of Cu. Even a solution treatment at 1100°°C is not sufficient to completely dissolve Nb and Ti in the matrix and undissolved (Nb, Ti)C precipitates were observed in oil quenched state. Strain induced aging at 400°°C causes simultaneous coarsening of existing precipitates and nucleation of fresh carbides, which results in multi-stage hardening in this steel. Strong precipitate-dislocation interactions cause retardation in recrystallization of deformation structure leading to retention of high hardness levels even on prolonged aging.