Materials that can serve as long-lived barriers to biofluids are essential to the development of any type of chronic electronic implant. Devices such as cardiac pacemakers and cochlear implants use bulk metal or ceramic packages as hermetic enclosures for the electronics. Emerging classes of flexible, biointegrated electronic systems demand similar levels of isolation from biofluids but with thin, compliant films that can simultaneously serve as biointerfaces for sensing and/or actuation while in contact with the soft, curved, and moving surfaces of target organs. This paper introduces a solution to this materials challenge that combines (i) ultrathin, pristine layers of silicon dioxide (SiO2) thermally grown on device-grade silicon wafers, and (ii) processing schemes that allow integration of these materials onto flexible electronic platforms. Accelerated lifetime tests suggest robust barrier characteristics on timescales that approach 70 y, in layers that are sufficiently thin (less than 1 μm) to avoid significant compromises in mechanical flexibility or in electrical interface fidelity. Detailed studies of temperature- and thickness-dependent electrical and physical properties reveal the key characteristics. Molecular simulations highlight essential aspects of the chemistry that governs interactions between the SiO2 and surrounding water. Examples of use with passive and active components in high-performance flexible electronic devices suggest broad utility in advanced chronic implants.

We report the results of an experimental and theoretical study of hydrogen storage in sodium alanate (NaAlH(4)). Reversible hydrogen storage in this material is dependent on the presence of 2-4% Ti dopant. Our combined study shows that the role of Ti may be linked entirely to Ti-containing active catalytic sites in the metallic Al phase present in the dehydrogenated NaAlH(4). The EXAFS data presented here show that dehydrogenated samples contain a highly disordered distribution of Ti-Al distances with no long-range order beyond the second coordination sphere. We have used density functional theory techniques to calculate the chemical potential of possible Ti arrangements on an Al(001) surface for Ti coverages ranging from 0.125 to 0.5 monolayer (ML) and have identified those that can chemisorb molecular hydrogen via spontaneous or only moderately activated pathways. The chemisorption process exhibits a characteristic nodal symmetry property for the low-barrier sites: the incipient doped surface-H(2) adduct's highest occupied molecular orbital (HOMO) incorporates the sigma antibonding molecular orbital of hydrogen, allowing the transfer of charge density from the surface to dissociate the molecular hydrogen. This work also proposes a plausible mechanism for the transport of an aluminum hydride species back into the NaH lattice that is supported by Car-Parrinello molecular dynamics (CPMD) simulations of the stability and mobility of aluminum clusters (alanes) on Al(001). As an experimental validation of the proposed role of titanium and the subsequent diffusion of alanes, we demonstrate experimentally that AlH(3) reacts with NaH to form NaAlH(4) without any requirement of a catalyst or hydrogen overpressure.

Complex metal hydrides are perhaps the most promising hydrogen storage materials for a gradual transformation to a hydrogen-based economy. We have used a computational approach to aid the ongoing experimental effort to understand the reversible hydrogen storage in Ti-doped NaAlH(4) and propose a plausible first step in the rehydrogenation mechanism. The study provides insight into the catalytic role played by the Ti atoms on an Al surface in the chemisorption of molecular hydrogen and identifies the local arrangement of the Ti atoms responsible for the process. Our results can potentially lead to ways of making other similar metal hydrides reversible.

Aluminum hydride, AlH3, is the most well-known alane. Though thermodynamically unstable under ambient conditions, it is easily prepared in a metastable state that will undergo controlled thermal decomposition to produce H2 and Al at around 100 °C. AlH3 contains 10.1 wt % hydrogen and has a density of 1.48 g/mL and is therefore of interest for on-board automotive hydrogen storage. ΔH f and ΔG f298K for α-AlH3 are −9.9 and 48.5 kJ/mol AlH3, respectively. The latter value yields an equilibrium hydrogen fugacity of ∼5 × 105 atm at 298 K, which is equivalent to a hydrogen pressure of ∼7 × 103 atm. Thus, the direct regeneration of AlH3 from spent Al with gaseous H2 is deemed impractical. This paper describes an alternate approach to the regeneration of AlH3 via a low-temperature, low-pressure, reversible reaction using Ti-doped Al powder and triethylenediamine (TEDA). The adduct is formed in a slurry of the Al powder and a solution of TEDA in THF in contact with H2. The AlH3−TEDA product is insoluble and precipitates from solution. The reaction, forward or reverse, depends on the departure of the actual pressure of H2 gas above or below the equilibrium pressure. Pressure−composition isotherms in the range of 70−90 °C are presented from which thermodynamic data were calculated. A possible reaction mechanism is described. The relevance of this system to hydrogen storage applications is also noted.