Aluminum hydroxide is a key product for the industrial production of alumiana and aluminium, ceramics insulator and refractories, desiccants, absorbents, flame retardants, filers for plastics and rubbers, catalysts, and various construction materials. The production of these arrays of useful material products is grounded on the multiple thermal decomposition pathways of Al(OH)3, which involve major crystallographic dislocations and many microstructure reconfigurations on variable lines of phase transitions, from the raw material up to large varieties of precursors and commercial grade products. A wide range of literature on this subject is available, and recent reviews cover suitable information about preparation and characterization of different activated alumina products with specific properties and applications. In our previous papers, there was studied the mechanisms of aluminum hydroxide phase transitions, during low temperature calcination, namely, at 260ºC, 300ºC, 400ºC and 600 ºC, under chosen particularly conditions, for promoting the nucleation of the amorphous phases. Collected data suggest that raw aluminum hydroxide; dried, milled and classified is a precursor for the new low temperature activated alumina transition phases, carrying distinctive characteristics and properties, due to products enrichment in amorphous phases. Accordingly, as effects of the main driving factors (temperature and rate of heating, and initial particle size dimension) on the aluminum hydroxide as new precursor, notable changes were observed in products mineral composition, morphology and specific surface area, pore size, pore distribution, and the particle size distribution. Beside, some other secondary effects have to be apprehended. For example, the main phase transition process dinamic factors control over some physical and technical properties of the new products, like: absolute density, brightness, oil absorption capacity and water absorption capacity. The purpose of this work was to continue the characterization of low temperature activation alumina products, and also, to measure the adsorption capacity and to reveal adsorption kinetics mechanisms. Thus, the first step of survey was silver adsorption maximum capacity measurements for all sample prepared by heating the precursor alumina hydroxide, milled and classified as 5 different dimension size fractions to 260, 300, 400 and 600ºC. Hereinafter, four samples, carefully selected as representative for the entire lot of samples, were used for the study of kinetics mechanism and data fitting to the adequate kinetic equations. Confident data validate the pseudo second order kinetic model for the entire activation process, independently of samples heating temperature and particles dimension.

This paper is reporting the data concerning impurities occlusion in the dried, milled and classified aluminum hydroxide, the sources of contamination and the ways to control the purity of classified aluminum hydroxide as raw material for special aluminas. Mainly, all the micronic size particles, floating in the super-saturated Bayer liquors, are potential sources of occluded impurities in the aluminum hydroxide particles. There are several mechanisms for embedding the impurities in crystalline substances. Of these, most probable ones in the Bayer alumina process are: a) occlusion of the spent liquor drops containing impurities inside the polycrystalline aluminum hydroxide congregates; b) hetero-nucleation of aluminum hydroxide on the surface of particles or colloids containing one or more impurities (the foreign particles are seized inside a crystals or inside of a crystalline multi-particulate association); c) incorporation of available ions or molecule reactive fragments in the poor crystalline structures of aluminum hydroxide after nucleation, during different growth stages of all already aggregated particles, under certain super-saturations. d) building up bridges between the scanty aggregated particles or filling the inside hollows of these aggregates with new quickly crystallized material, including the particulate impurities, mainly, during large fluctuations of the super-saturation. Using scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectroscopy EDS (Apollo SSD detector, EDAX), the contributions of each of these mechanisms can be investigated simply and assumed from the collected data. It was shown that well crystallized phases originating directly from bauxite (like the aluminum substituted goethite and substituted hematite, rutile or quartz), as well as the well as the crystallized new born phases during specific Bayer reactions (like cancrinite, are not promoting directly the impurities occlusion. Poor crystalline phases (like sodalite and katoite or other secondary phases and their micronic size fragments are really sustaining impurities occlusion through all the acknowledged mechanisms.

As the International Year of Crystallography is going on, the crystallographic community is actively involved in a number of activities and events to connect crystallography and society. The European Area, where the seminal discoveries took place, combines the traditional out-reach activities carried out during the last few years with several new activities to make crystallography and crystallization attractive to the public in general. The crystal growing competitions, involving high schools, organized since 2008 in Spain, are in 2014 very popular in the ECA Area. Since 2011, a Summer Scientific Campus has been held at the University of Oviedo in which the students develop a research project that incorporates crystallography as the core theme (X-Ray diffraction in the Forensic Science, Crystallisation and Mineralogy Workshops) [1]. An extension of that is the Spanish program for IYCr2014 "Science, Crystals and Society" [2]. For the European activities, the ECA Executive Committee created the IYCr2014 Coordination Committee, to gather initiatives in the ECA area and to be a link with the IUCr worldwide supervision of IYCr2014. "Discovering", "Getting involved" and "Communicating" are the three key points to connect scientists and society. The main objective of this project is to integrate and disseminate the science of crystallography into the European society, particularly among students, boosting the European dimension of the Project. "Discovering", "Getting involved" and "Communicating" are the three key points that will connect scientists and society. This European platform (http://www.iycr2014.eu) and the associated social networks content are the European links between crystallography and society using a number of tools: A dedicated IP/TV, ITunesU Chanel, or the Google Course Builder tool platform. Acknowledgements: Financial support from Ministerio de Economía y Competitividad de España (MAT2010-15094, Factoría de Cristalización–Consolider Ingenio 2010) and ERDF.

The subject of this paper was the study of antimicrobial capacity of silver loaded on the low temperature activated alumina products and evaluation of these products as decontaminants in the water and waste waters decontamination treatments. The low temperature activated alumina products have been characterized as valuable adsorbents in previous papers. So, by reason the next step to investigate these silver loaded products and finding their performaces as antimicrobial agents was an alluring prospect. For this purpose, a common bacterian inoculus was choosen for experiments, and a penmisive method to measure the rate of inhibition was adopted. Experimental data have shown the dependence of the inhibition rate on the following parameters concerning the adsorbent properties: the thermal treatments, particle size dimension of adsorbent (low temperature activated alumina products), concentration of siver adsorbed on particle surface and density of bioreactive centers, representing the number of particles on unit volume of the liquid containing the bacterial cells. Also, the experiments lay out that the aluminum hydroxide calcined at 300 and 400ºC exibits the largest silver adsorbed concentration and the highest inhibition rate (close to 100 %). Little dependence of inhibition rate on pH, in the interval 5.0 � 8.0, was observed. For application of depolluting agent in diferent technological processes, it is necesary to measure the minimum inhibitory concentration in therms of g of silver loaded on the low temperature activated alumina /L.

No abstract