No abstract

β-cyclodextrin (β-CD) and hydroxypropyl-β-cyclodextrin (HP-β-CD) were used to prepare insoluble polymers using epichlorohydrin as a cross-linking agent and the azo dye Direct Red 83:1 was used as target adsorbate. The preliminary study related to adsorbent dosage, pH, agitation or dye concentration allowed us to select the best conditions to carry out the rest of experiments. The kinetics was evaluated by Elovich, pseudo first order, pseudo second order, and intra-particle diffusion models. The results indicated that the pseudo second order model presented the best fit to the experimental data, indicating that chemisorption is controlling the process. The results were also evaluated by Freundlich, Langmuir and Temkin isotherms. According to the determination coefficient (R2), Freunlich gave the best results, which indicates that the adsorption process is happening on heterogeneous surfaces. One interesting parameter obtained from Langmuir isotherm is qmax (maximum adsorption capacity). This value was six times higher when a β-CDs-EPI polymer was employed. The cross-linked polymers were fully characterized by nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA). Also, morphology and particle size distribution were both assessed. Under optimized conditions, the β-CDs-EPI polymer seems to be a useful device for removing Direct Red 83:1 (close 90%), from aqueous solutions and industrial effluents. Complementarily, non-adsorbed dye was photolyzed by a pulsed light driven advanced oxidation process. The proposed methodology is environmental and economically advantageous, considering the point of view of a sustainable recycling economy in the textile dyeing process.

No abstract

The results support the use of the MWI method in the preparation of solid HP-β-CD-thymol complexes, due to greater encapsulation efficiency and technological and economic advantages for industrial applications. © 2018 Society of Chemical Industry.

Soluble and membrane-bound peroxidases (PODs) were extracted from red cabbage using Triton X-114. Optimum activity was obtained at pH 4.0 for both enzymes, and both were inactivated by sodium dodecyl sulfate (SDS). The K(M) and V(m) values for H(2)O(2) were found to be 0.98 mM and 8.1 μM/min, respectively, for soluble POD and 0.82 mM and 6.1 μM/min, respectively, for membrane-bound POD. When the 2,2'-azinobis(3-ethylbenzothiazolinesulfonic acid (ABTS) concentration was increased, maintaining a steady concentration of H(2)O(2), the activity was inhibited at the highest ABTS concentrations in soluble POD. Ascorbic acid was found to be the most active modulator of POD activity. The effect of cyclodextrins was also studied, and the complexation constant between ABTS and hydroxypropyl-β-cyclodextrins (HP-β-CDs) was calculated (K(c) = 312 M(-1)). Membrane-bound POD is more thermostable than soluble POD, losing >90% of relative activity after 5 min of incubation at 76.6 and 30.2 °C, respectively.