No abstract

Microchannels are used in applications where large amount of heat is produced. Phase change material (PCM) slurries can be used as a heat transfer fluid in microchannels as they provide increased heat capacity during the melting of phase change material. For the present numerical investigation, performance of a nano-encapsulated phase change material slurry in a manifold microchannel heat sink was analyzed. The slurry was modeled as a bulk fluid with varying specific heat. The temperature field inside the channel wall is solved three dimensionally and is coupled with the three dimensional velocity and temperature fields of the fluid. The model includes the microchannel fin or wall effect, axial conduction along the length of the channel, developing flow of the fluid and not all these features were included in previous numerical investigations. Influence of parameters such as particle concentration, inlet temperature, melting range of the PCM, and heat flux is investigated, and the results are compared with the pure single phase fluid.

This study presents a theoretical model to simulate the temperatures and productivity of a single-slope, single-basin solar still when an external solar enhancement is used. Experiments were performed in the New Mexico region (32.3199° N, 106.7637° W) to validate the numerical model. A point focusing Fresnel lens was used in the experiments to enhance the solar input. It was found that a significant rise in the productivity of the still was achieved with the Fresnel lens. Parametric study by varying the water depth showed the Fresnel lens was more effective for larger water depths. In addition, the Fresnel lens can aid in improving the overall efficiency of the solar still.

Day-to-day observations reveal numerous medical and social situations where maintaining physical distancing is either not feasible or not practiced during the time of a viral pandemic, such as, the coronavirus disease 2019 (COVID-19). During these close-up, face-to-face interactions, a common belief is that a susceptible person wearing a face mask is safe, at least to a large extent, from foreign airborne sneeze and cough droplets. This study, for the first time, quantitatively verifies this notion. Droplet flow visualization experiments of a simulated face-to-face interaction with a mask in place were conducted using the particle image velocimetry setup. Five masks were tested in a snug-fit configuration (i.e., with no leakage around the edges): N-95, surgical, cloth PM 2.5, cloth, and wetted cloth PM 2.5. Except for the N-95 mask, the findings showed leakage of airborne droplets through all the face masks in both the configurations of (1) a susceptible person wearing a mask for protection and (2) a virus carrier wearing a mask to prevent the spreading of the virus. When the leakage percentages of these airborne droplets were expressed in terms of the number of virus particles, it was found that masks would not offer complete protection to a susceptible person from a viral infection in close (e.g., <6 ft) face-to-face or frontal human interactions. Therefore, consideration must be given to minimize or avoid such interactions, if possible. This study lends quantitative support to the social distancing and mask-wearing guidelines proposed by the medical research community.