No abstract

Dithienogermole‐co‐thieno[3,4‐c]pyrroledione (DTG‐TPD) polymers incorporating chemically cross‐linkable sidechains are reported and their properties compared to a parent polymer with simple octyl sidechains. Two cross‐linking groups and mechanisms are investigated, UV‐promoted radical cross‐linking of an alkyl bromide cross‐linker and acid‐promoted cationic cross‐linking of an oxetane cross‐linker. It is found that random copolymers with a 20% incorporation of the cross‐linker demonstrate a higher performance in bulk heterojunction solar cells than the parent polymer, while 100% cross‐linker incorporation results in deterioration in device efficiency. The use of 1,8‐diiodooctane (DIO) as a processing additive improves as‐cast solar cell performance, but is found to have a significant deleterious impact on solar cell efficiency after UV exposure. The instability to UV can be overcome by the use of an alternative additive, 1‐chloronapthalene, which also promotes high device efficiency. Cross‐linking of the polymer is investigated in the presence and absence of fullerene highlighting significant differences in behavior. Intractable films cannot be obtained by radical cross‐linking in the presence of fullerene, whereas cationic cross‐linking is successful.

Soluble co-polymers of the fused selenophene monomer, DSG, with N-octylthienopyrrolodione are reported. Polymer solar cells fabricated from blends with PC71BM exhibit promising performance in inverted bulk heterojunction solar cells