BackgroundIntervertebral disc degeneration has an annual worldwide socioeconomic impact masked as low back pain of over 70 billion euros. This disease has a high prevalence over the working age class, which raises the socioeconomic impact over the years. Acute physical trauma or prolonged intervertebral disc mistreatment triggers a biochemical negative tendency of catabolic-anabolic balance that progress to a chronic degeneration disease. Current biomedical treatments are not only ineffective in the long-run, but can also cause degeneration to spread to adjacent intervertebral discs. Regenerative strategies are desperately needed in the clinics, such as: minimal invasive nucleus pulposus or annulus fibrosus treatments, total disc replacement, and cartilaginous endplates decalcification.Main bodyHerein, it is reviewed the state-of-the-art of intervertebral disc regeneration strategies from the perspective of cells, scaffolds, or constructs, including both popular and unique tissue engineering approaches. The premises for cell type and origin selection or even absence of cells is being explored. Choice of several raw materials and scaffold fabrication methods are evaluated. Extensive studies have been developed for fully regeneration of the annulus fibrosus and nucleus pulposus, together or separately, with a long set of different rationales already reported. Recent works show promising biomaterials and processing methods applied to intervertebral disc substitutive or regenerative strategies. Facing the abundance of studies presented in the literature aiming intervertebral disc regeneration it is interesting to observe how cartilaginous endplates have been extensively neglected, being this a major source of nutrients and water supply for the whole disc.ConclusionSeveral innovative avenues for tackling intervertebral disc degeneration are being reported – from acellular to cellular approaches, but the cartilaginous endplates regeneration strategies remain unaddressed. Interestingly, patient-specific approaches show great promise in respecting patient anatomy and thus allow quicker translation to the clinics in the near future.

Degeneration of the intervertebral disc (IVD) represents a significant musculoskeletal disease burden. Tissue engineering has proposed several strategies comprising the use of biodegradable materials to prepare scaffolds that can present mechanical properties similar to those of native IVD tissues. However, this might be insufficient, since the patient's intervertebral space geometry must be replicated to allow for appropriate implant fixation and integration. Herein, we propose the use of reverse engineering and rapid prototyping techniques with the goal of preparing custom-tailored annulus fibrosus scaffolds; these techniques have previously been applied to rabbit models. The IVD reverse-engineered architecture was obtained by means of microcomputed tomography acquisition and three-dimensional modelling, resulting in a computer-aided design (CAD) that replicates the original rabbit IVD. Later, a fused deposition-modelling three-dimensional printer was used to produce the scaffolds with different geometries provided by the CAD, using polycaprolactone (PCL) with 100% infill density. The microstructure of the PCL scaffolds was investigated by scanning electron microscopy (SEM), which allowed us to observe an adequate fusion adhesion between the layers. The SEM images revealed that, up to the point of moderate resolution, the porosities manually designed in the CAD model were successfully replicated. The PCL scaffolds' three-dimensional architecture was also assessed by means of microcomputed tomography analysis. Compressive stiffness was determined using a mechanical testing system. Results showed higher values than those of human IVDs (5.9-6.7 kN mm(-1) versus 1.2 kN mm(-1), respectively). In vitro studies were performed to investigate the possible cytotoxicity of the polycaprolactone scaffolds' leachables. The results showed that the custom-tailored PCL scaffolds do not have any deleterious cytotoxic effect over annulus fibrosus cells or the mouse lung fibroblast's cell line. This study proposed a simple, rapid, and low-cost strategy to fabricate custom-tailored annulus fibrosus scaffolds. In the future, this strategy might be used in association with nucleus pulposus regeneration strategies to facilitate the development of tissue-engineered total disc replacement implants specific to each patient, with a goal of full IVD regeneration.

Several attempts made so far to combine silk fibroin and polyurethane, in order to prepare scaffolds encompassing the bioactivity of the former with the elasticity of the latter, suffer from critical drawbacks concerning industrial and clinical applicability (e.g., separation of phases upon processing, use of solvents unaddressed by the European Pharmacopoeia, and use of degradable polyurethanes). Overcoming these limitations, in this study, we report the successful blending of regenerated silk fibroin with a medical-grade, non-degradable polyurethane using formic acid and dichloromethane, and the manufacturing of hybrid, semi-degradable electrospun tubular meshes with different ratios of the two materials. Physicochemical analyses demonstrated the maintenance of the characteristic features of fibroin and polyurethane upon solubilization, blending, electrospinning, and postprocessing with ethanol or methanol. Envisioning their possible application as semidegradable substrates for haemodialysis arteriovenous grafts, tubular meshes were further characterized, showing submicrometric fibrous morphologies, tunable mechanical properties, permeability before and after puncture in the same order of magnitude as commercial grafts currently used in the clinics. Results demonstrate the potential of this material for the development of hybrid, new-generation vascular grafts with disruptive potential in the field of in situ tissue engineering. © 2018 Wiley Periodicals, Inc. J. Biomed. Mater. Res. Part B, 2018.