Many fungi can develop on building material in indoor environments if the moisture level is high enough. Among species that are frequently observed, some are known to be potent mycotoxin producers. This presence of toxinogenic fungi in indoor environments raises the question of the possible exposure of occupants to these toxic compounds by inhalation after aerosolization. This study investigated mycotoxin production by Penicillium brevicompactum, Aspergillus versicolor, and Stachybotrys chartarum during their growth on wallpaper and the possible subsequent aerosolization of produced mycotoxins from contaminated substrates. We demonstrated that mycophenolic acid, sterigmatocystin, and macrocyclic trichothecenes (sum of 4 major compounds) could be produced at levels of 1.8, 112.1, and 27.8 mg/m 2 , respectively, on wallpaper. Moreover, part of the produced toxins could be aerosolized from the substrate. The propensity for aerosolization differed according to the fungal species. Thus, particles were aerosolized from wallpaper contaminated with P. brevicompactum when an air velocity of just 0.3 m/s was applied, whereas S. chartarum required an air velocity of 5.9 m/s. A. versicolor was intermediate, since aerosolization occurred under an air velocity of 2 m/s. Quantification of the toxic content revealed that toxic load was mostly associated with particles of size Ն3 m, which may correspond to spores. However, some macrocyclic trichothecenes (especially satratoxin H and verrucarin J) can also be found on smaller particles that can deeply penetrate the respiratory tract upon inhalation. These elements are important for risk assessment related to moldy environments. IMPORTANCEThe possible colonization of building material by toxinogenic fungi in cases of moistening raises the question of the subsequent exposure of occupants to aerosolized mycotoxins. In this study, we demonstrated that three different toxinogenic species produce mycotoxins during their development on wallpaper. These toxins can subsequently be aerosolized, at least partly, from moldy material. This transfer to air requires air velocities that can be encountered under real-life conditions in buildings. Most of the aerosolized toxic load is found in particles whose size corresponds to spores or mycelium fragments. However, some toxins were also found on particles smaller than spores that are easily respirable and can deeply penetrate the human respiratory tract. All of these data are important for risk assessment related to fungal contamination of indoor environments.

No abstract

No abstract

Biological aerosols from air constitute a significant source of exposure to microorganisms in public places. Airborne microorganisms are involved in the development of certain respiratory symptoms, allergies, or infections among users and occupants. Various sampling instruments have commonly been used in aerobiology to collect bacteria and fungi suspended in the air. The objective of this study was to develop a reliable procedure for sampling in indoor public environments presenting different levels of occupancy, airborne bacteria and fungi to be subjected to molecular analysis (bacteria and fungi quantitative PCR, capillary electrophoresis single strand conformation polymorphism fingerprinting). Four different sampling devices were tested in situ in an office building (open-plan type) and the sampling strategy chosen was tested in two museum contexts. In accordance with the drawbacks involved to our study (quantitative and qualitative aspects, cost, and overcrowding), cyclone device appeared to be most suitable. The results underline the effectiveness of this high-volume aerosol sampling device for both qualitative and quantitative molecular analysis. Four in situ sampling collections were carried out in 1 day in the Louvre Museum to study quantitative and qualitative variations of airborne bacterial and fungal diversity. The quantitative results revealed a similar order of magnitude for the numbers of both bacteria and fungi. In the Louvre Museum, the samples yielded between 3.7 Â indicate that the dominant bacterial community displayed a stable structure over a short period of time whereas dominant eukaryotic airborne community appeared more variable.

This is a PDF file of an article that has undergone enhancements after acceptance, such as the addition of a cover page and metadata, and formatting for readability, but it is not yet the definitive version of record. This version will undergo additional copyediting, typesetting and review before it is published in its final form, but we are providing this version to give early visibility of the article. Please note that, during the production process, errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal pertain.