No abstract

Due to the complex geometry and turbulent flow characteristics, it is hard to simulate the process of steam dumping of the pressurizer relief tank (PRT). In this study, we develop a compressible fluid solver PRTFOAM to numerically study the turbulent flow dynamics from a PRT. The PRTFOAM is implemented based on the OpenFOAM and designed to be capable of integrating various turbulence models. Two representative Reynolds-averaged Navier–Stokes (RANS) models and a Smagorinsky–Lilly SGS model based on Large Eddy Simulation (LES) are coupled and tested with PRTFOAM. The case of a flow past a circular cylinder (Re = 3900) is tested and analyzed comprehensively as a benchmark case. Then, the turbulent steam dumping process in the full geometry of a PRT is analyzed and compared with ANSYS CFX and literature reports. In addition, we tested the WALE model based on the PRT steam dumping process. The results show that SST k-ω model and Smagorinsky–Lilly SGS model-based LES approach are more appropriate than the LRR model for PRT simulations. Moreover, it shows that the simulation results of Smagorinsky–Lilly SGS model and WALE model are basically consistent under the condition of PRT steam dumping process. Under this condition, the drawbacks of Smagorinsky–Lilly SGS model are not obvious. Furthermore, the comparison with CFX showed that our open source solver could be used to obtain better results in complex engineering cases. The design and testing results would provide guidance for further analysis of thermal-hydraulics in reactors based on open source codes.

Due to the intrinsic nature of multi-physics, it is prohibitively complex to design and implement a simulation software platform for study of structural responses to a detonation shock. In this article, a partitioned fluid-structure interaction computing platform is designed for parallel simulating structural responses to a detonation shock. The detonation and wave propagation are modeled in an open-source multi-component solver based on OpenFOAM and blastFoam, and the structural responses are simulated through the finite element library deal.II.To capture the interaction dynamics between the fluid and the structure, both solvers are adapted to preCICE. For improving the parallel performance of the computing platform, the inter-solver data is exchanged by peer-to-peer communications and the intermediate server in conventional multi-physics software is eliminated. Furthermore, the coupled solver with detonation support has been deployed on a computing cluster after considering the distributed data storage and load-balancing between solvers. The 3D numerical result of structural responses to a detonation shock is presented and analyzed. On 256 processor cores, the speedup ratio of the simulations for a detonation shock reach 178.0 with 5.1 million of mesh cells and the parallel efficiency achieve 69.5%. The results demonstrate good potential of massively parallel simulations. Overall, a general-purpose fluid-structure interaction software platform with detonation support is proposed by integrating open source codes. And this work has important practical significance for engineering application in fields of construction blasting, mining, and so forth.

No abstract

No abstract