Article history:We present a fine patterning method of conductive lines on polyimide (PI) and glass substrates using silver (Ag) nanoparticles based on laser scanning. Controlled laser irradiation can realize selective sintering of conductive ink without damaging the substrate. Thus, this technique easily creates fine patterns on heat-sensitive substrates such as flexible plastics. The selective laser sintering of Ag nanoparticles was managed by optimizing the conditions for the laser scan velocity (1.0-20 mm/s) and power (10-150 mW) in order to achieve a small gap size, high electrical conductivity, and fine roughness. The fabricated electrodes had a minimum channel length of 5 µm and conductivity of 4.2 × 10 5 S/cm (bulk Ag has a conductivity of 6.3 × 10 5 S/cm) on the PI substrate. This method was used to successfully fabricate an organic field effect transistor with a poly(3-hexylthiophene) channel. . 유연소자에 기반이 되는 유기 반도체 는 저온에서 다양한 유연 기판 위에 화학적 센서 [3,4] , 로직소자 . 이러한 유기반도체를 이용한 유연소자의 전극은 증착 (evaporation) [4,12] , 잉크젯 프린팅(inkjet printing) [7] 그리고 rollto-roll(R2R)