No abstract

No abstract

This paper is intended to introduce a two‐arm Archimedean spiral antenna fed by a novel feed structure based on DSPSL (Double Sided Parallel Strip Line). A DSPSL provides an ease perpendicular matching network and an impedance transition between input impedance of a spiral antenna and system's impedance of 50 Ω in broadband frequency range. Measured and simulated VSWR and radiation pattern results show a good performance over ultra‐wide band from 2 to 20 GHz. © 2016 Wiley Periodicals, Inc. Microwave Opt Technol Lett 58:1879–1883, 2016

No abstract

In this article, a high gain rectifying antenna using a pair of pentagonal loops has been developed for wireless power transfer at 5.8 GHz. For a long range wireless power transfer, the rectenna system requires high gain and high conversion efficiency. The proposed rectenna system consists of a pair of pentagonal loop antennas to achieve high gain characteristics, an impedance transformer, and a rectifying circuit which are designed on a CPS (Coplanar stripline) structure. A metal reflector is also placed for achieving higher gain characteristics in a broadside direction. A CPS to microstrip line balun is designed to verify performance of the pentagonal loop antennas based on CPS structure. The fabricated pentagonal antenna demonstrates high gain of 10.1 dBi, and it results in receiving more RF energy from a designated source. An impedance transformer is designed to change the antenna's input impedance to diode's input impedance and block higher order signals coming back from the rectifying diode. To obtain high conversion efficiency, several load resistors are used. The proposed rectenna system based on CPS pentagonal loops shows measured conversion efficiency of 75% at 5.8 GHz, and its performance has been verified through simulation and measurement.